Products

One Cobalt-S Signal Box Lever including all installation accessories.Cobalt-S Levers bring a sense of reality to the control of model railways. The...

One Cobalt-S Signal Box Lever including all installation accessories.Cobalt-S Levers bring a sense of reality to the control of model railways. The...

Six Cobalt-S Signal Box Levers including all installation accessories.Cobalt-S Levers bring a sense of reality to the control of model railways. Th...

SIX plug & play pre-wired switches – dual red/green Mimic LEDs – (pre-terminated plug-in LEDs).Please use with an SPS-12 split-rail power sup...

SIX plug & play pre-wired switches – green Mimic LEDs – (pre-terminated plug-in LEDs).Please use with an SPS-12 split-rail power supply.

Cobalt-SS Extension leads. Use these to mount your motors further away from your Control Board. Contains 3 x 1000mm extension cables.

Cobalt-SS Extension leads. Use these to mount your motors further away from your Control Board. Contains 3 x 600mm extension cables.

SIX plug & play pre-wired switches – red Mimic LEDs – (pre-terminated plug-in LEDs).Please use with an SPS-12 split-rail power supply.

Cobalt DCP-CBSS-2 Pack – Small, Reliable, Super-Smooth Above-Board Turnout Motors, ready for DC or DCC use. This pack contains 2x Cobalt-SS Above-B...

Cobalt-SS Crossover pack comprises 2 x Cobalt-SS and AccessoriesEach of the two independent outputs of the Cobalt-SS control board can actually pow...

Cobalt Value Pack (Selection of parts and accessories) A combination of tools, accessories and spare parts to make installation Cobalt Motors easy ...

Cobalt Mounting Foam Pads (12 Pack)Twelve custom cut double sided foam mounting pads and specially prepared, “selectively glued,” colour-printed ba...

Cobalt Tiebar Labels (12 Pack) Usable with and highly recommended for all Cobalt variants. Twelve specially prepared, “selectively glued,” colou...

Three spare harnesses and connection PCB’s for Cobalt-S wiring.

A high-reliability UK power supply with a regulated DC output, recommended for use in the United Kingdom. Input 110-250v AC Output 12.0v DC at 1.5a...

Cobalt Right-Angle Adapters w/Mounting Hardware (3 Pack) The Cobalt right-angle adapter will allow you to install your Cobalt motors horizontally, ...

Cobalt Relay Extension BoardCobalt REX is an infinitely flexible set of add-on changeover relays that can be operated all at once or in pairs. Coba...

A pack of five extension pins suitable for Peco, Seep, Hornby and Hattons point motors. Each pack includes 5 extension pins and 5 joining collars.

Something special for those who find soldering complex wiring difficult: Three complete harnesses for Cobalt-S levers complete with 9-way spring co...

12v Split-Supply PCB only.Use this PCB with your own power supplies to create a split-rail power supply.

2 12v DC Split Power Supply Kit. (inc PCB and 2x Universal Wall Plugs) This DCCconcepts (+12 (0v) (-12) split-rail power supply kit includes 2x 1 a...

(Normally off or N.O. momentary type)These detectors have been designed to be very easy to install. Only 4mm in diameter, they will fit between the...

True-scale, high quality models of the Westinghouse EP Pneumatic Point Motor. Widely used in the UK, Australia and parts of Europe. These accurate ...

True-scale, high quality models of the Westinghouse EP Pneumatic Point Motor. Widely used in the UK, Australia and parts of Europe. These accurate...

True-scale, high quality models of the Westinghouse EP Pneumatic Point Motor. Widely used in the UK, Australia and parts of Europe. These accurate ...

An assortment of cranks with all types represented for those who want to experiment.Contains 10 cranks, rod end pockets, rivets and pins etc.

A pack of three double-crank brass compensating cranks (6.25mm post) plus fixing pins etc. Designed for our working rodding system these will find ...

100 hardened and gold plated pins for fixing of rod stools, track or many other things around the layout.Small and subtle but very strong, the gold...

500 hardened and gold plated pins for fixing of rod stools, track or many other things around the layout.Small and subtle but very strong, the gold...

Rodding stools are surprisingly close together on the prototype so you will need lots for longer runs.This pack contains 100 ready-to-use cranks an...

The Rod only pack contains 40 250mm lengths of rodding, rod pockets and mounting rivets plus some turnout motor linkages.An ideal add-on for the fu...

With the following contents, this set will get you underway with working rodding without the need for added parts.20x lengths of 250mm rodding50x ...

T-2.4D Tip – A medium D type tip for DCS-ST2080D. Tip face is a 2.4mm with both a ‘line’ and ‘face’ soldering area. This tip can be used for solder...

T-3C Tip – A medium C type tip for DCS-ST2080D. Tip face is a 3.0mm angled flat giving you the ideal tip for soldering mid sized brass parts, track...

AT571 65 Watt Hand-Held Soldering Iron with Temperature Control and Additional Tip The AT571 is a 65 watt temperature-dial controlled soldering iro...

Brass Wool Tip Cleaner – A convenient pot with a wad of activated brass ‘wool’ which will take all excess solder from the tip and give it a great c...

Countersunk Screw Set 8x Vials with 60 screws in each.Countersunk head micro-screw set includes 60+ each 1.0x3mm, 1.0x5mm, 1.0x8mm, 1.5x4mm, 1.5x6m...

Removes excess solder and cleans up solder joints. Essential for clean kit building in brass and for removal of parts in electronics.Desoldering Br...

Mega Screw Set 16x 60 Vials (w/20 Drill Bit Set) Mega set of 16 vials each containing 60 panhead (60x 1.0x3mm, 60x 1.0x5mm, 60x 1.0x8mm, 60x 1.5x4...

Pan Head Screw Set 8x Vials with 60 screws in each.Pan head micro-screw set includes 60+ each 1.0mm x 3mm, 1.0mm x 5mm, 1.0mm x 8mm, 1.5mm x 4mm, 1...

Sapphire 100 (Low Temp Solder) Sapphire 100 is an exciting solder which is designed for use on white-metal and similar alloys. We worked hard to ma...

Sapphire 145 is 0.8mm diameter solder with no peaking and which flows absolutely brilliantly. It has a very narrow melt range which makes quick joi...

The solder that in combination with our Sapphire No Clean Flux, makes everyone an expert! Sapphire 179 solder is 0.6mm diameter solder which flows ...

DCCconcepts Sapphire No-Clean flux is an ideal companion that will make it possible for you to make perfect joints easily every time in electronics...

Super-high quality 80 Watt adjustable (with digital control) soldering iron with a 4-core ceramic PTC heater. The ST2080D has a temperature range f...

Super-high quality 150 Watt adjustable (with digital control) soldering iron with a 4-core ceramic PTC heater. The ST2150D has a temperature range ...

T-1.2D Tip – A medium D type tip for DCS-ST2065D, DCS-ST60, DCS-ST80 & DCS-AT689A irons. Tip face is a 1.2mm with both a ‘line’ and ‘face’ sold...

T-1C Tip – A medium-small C type tip for DCS-ST2065D, DCS-ST60, DCS-ST80 & DCS-AT689A . Tip face is a 1.0mm angled flat giving you real versati...