Electrical Components

Brand: Peco Part Number: PL-80 Scale / Type: HO / OO Scales Our Code: PEPL-80 These new Power Feed Joiners will help address the worrie...

Brand: Peco Part Number: PL-11 Scale / Type: HO / OO Scales Our Code: PL-11 Side mounted turnout motor. Designed to clip into the side ...

These new Power Feed Joiners will help address the worries of soldering that many modellers' have: they're the safe, clean and tidy way of bringing...

Brand: Peco Part Number: PL-13 Scale / Type: N / HO / OO / O Scales Our Code: PL-13 simple, inexpensive switch easily fitted underneath...

Provides the short burst of current needed to operate the PL-10 Turnout Motor. May be ganged using the Joining Bar PL-24

Brand: Peco Part Number: ST-9 Scale / Type: N Scale Our Code: ST-9 PECO Setrack N Gauge Code 80 - Unit trackage System The high quality r...

Decoder Wire -  Stranded 6m (32g) Black. 6 metres (enough for 50+ installations) of Black Stranded 32 gauge Decoder wire.

18 strand cable ideal for wiring model Railways & similar applications:Rated: 1.4A @ 1000v MaxOutside Diameter: 1.0mm

Brand: Gaugemaster Part Number: GM56 Scale / Type: HO / OO Scales For modellers who already have their own buffer stops and are busy popula...

Plug Together 12 Way Connector Block Set. Rated 6amp Easily cut to required number.

These new Power Feed Joiners will help address the worries of soldering that many modellers' have: they're the safe, clean and tidy way of bringing...

Code 100 Set Track Power Clip

Momentary action - toggle springs back to centre (off) position when released.Ideal for operating solenoid motors, such as point motors used on mod...

Brand: Hornby Part Number: R8232 Scale / Type: OO Scale To adapt Hornby points for use with DCC Systems

Pack of 5 SPST Miniature switches. 2 positons: ON/OFF (H 9 x W 13 x D 7mm) Hole required: 6.35mm Rated: 5A/28v DC

Heat Shrink Black (36 Pack)Fine heat shrink is essential for decoder installations. There is enough in one pack for well over 150 joints.

Brand: Peco Part Number: PL-26Y Scale / Type: N / HO / OO / O Scales Our Code: PL-26Y Provides a short burst of currents neede to opera...

If using LEDs for any other application on the layout that doesn't involve SmartSwitch, then these resistors should be connected to each LED (the l...

Brand: Peco Part Number: PL-27 Scale / Type: N / HO / OO / O Scales Our Code: PL-27 Six-bay panel for use with the Peco clip-in switch...

Power Clip and Connector for Bachmann EZ Command Controller

Brand: Peco Part Number: PL-26W Scale / Type: N / HO / OO / O Scales Our Code: PL-26W Provides a short burst of currents needed to oper...

18 strand cable. ideal for Model Railway layout wiring & similar applications:Rated: 1.4A @ 1000v MaxOutside Diameter: 1.0mm

Push on Terminal Connectors and shrouds. These connectors make modification and fault finding so much easier than soldered wiring. Use them to conn...

Decoder Wire - Stranded 6m (32g) Red. 6 metres (enough for 50+ installations) of Red Stranded 32 gauge Decoder wire.

A230-12Crocodile ClipsPack containing: 1 x red and 1 x black 30mm crocodile clips.

Brand: Train Tech Part Number: CL2 Scale / Type: HO / OO Scales Our Code: CL2 Instant easy lighting for any coach. Easy to fit in s...

Brand: Gaugemaster Part Number: GM14 Scale / Type: Z / N / TT / HO / OO / O / Gauge 1 / G / Slot Cars Six of the Hornby-style crimped pin t...

Heat Shrink Assorted Colours (36 Pack)An assorted pack of 36pcs total covering all small heatshrink colours. Fine heatshrink is essential for decod...

Pack containg 10 Male & 10 Female Micro Spade Connectors with the appropriate heatshrink.The female spade will fit Hornby & Peco point motors.

This track tester works on OO, HO and N Gauge track and enables you to quickly test track for DCC or DC power as well as also helping you to locate...

Handy for use with the Pecolectrics SmartSwitch these LEDs (Light Emitting Diodes) can be used to give a visual indication of the route set on a tu...

Brand: Gaugemaster Part Number: DCC40 Scale / Type: N / HO / OO Scales Automatically switches polarity in a reverse-loop situation - comple...

Pack of 5 SPDT Miniature Changeover switches. 2 postions: ON/ON (H 9 x W 13 x D 7mm) Hole required: 6.35mm (Rated: 5A/28v DC) 

Brand: Peco Part Number: PL-34 Scale / Type: N / HO / OO / O Scales Our Code: PL-34 Wiring Harness to aid wiring Peco points. Pack contai...

Pack containing 2 each of red & black 4mm plugs

3-Wire RGB Ribbon (5m)A 5 metre length of 3-wire ribbon cable for interconnection of all 3-wire switching including Cobalt Alpha (red/green/black) ...