DCC Accessories

Brand: Hornby Part Number: R8232 Scale / Type: OO Scale To adapt Hornby points for use with DCC Systems

Decoder Wire -  Stranded 6m (32g) Black. 6 metres (enough for 50+ installations) of Black Stranded 32 gauge Decoder wire.

Heat Shrink Black (36 Pack)Fine heat shrink is essential for decoder installations. There is enough in one pack for well over 150 joints.

Decoder Wire - Stranded 6m (32g) Red. 6 metres (enough for 50+ installations) of Red Stranded 32 gauge Decoder wire.

The DCC80 Autofrog is a simple switch that automatically changes the frog polarity on your DCC layout. In most situations, the use of electrofrog p...

3-Wire RGB Ribbon (5m)A 5 metre length of 3-wire ribbon cable for interconnection of all 3-wire switching including Cobalt Alpha (red/green/black) ...

Heat ShrinkRed (36 Pack)Fine heat s hrink is essential for decoder installations. There is enough in one pack for well over 150 joints.

Cobalt-SS Crossover pack comprises 2 x Cobalt-SS and AccessoriesEach of the two independent outputs of the Cobalt-SS control board can actually pow...

TWIN Wire Decoder Stranded 6m (32g) Red / Black6 metres of twinned Red and Black Stranded 32 gauge Decoder wire – When it comes to installations, t...

Plug and Play Universal fascia panel supporting LocoNet. Two RJ12 front panel Throttle jacks. Three RJ12 rear pass-through LocoNet jacks Suppo...

Micro harness 4-way. Pack of 3.

Decoder Wire - Stranded 6m (32g) White. 6 metres (enough for 50+ installations) of White Stranded 32 gauge Decoder wire.

Enables locomotives without decoder sockets to have an 8-pin decoder socket fixed to them.   Socket Dimensions: 10mm x 10mm x 5mmCable Length: 90mm...

Brand: Train Tech Part Number: TT1 Scale / Type: N / TT / HO / OO Scales Our Code: TT1 This track tester works on OO, HO and N Gauge trac...

Decoder Wire - Stranded 6m (32g) Orange. 6 metres (enough for 50+ installations) of Orange Stranded 32 gauge Decoder wire.

RJ12 6pin Curly Cord For NCE Powercab and Cobalt Alpha – 2m/6ftCan also be used for NCE Procab connections.2m/6ft curly cable with RJ12 connectors ...

Decoder Wire - Stranded 6m (32g) Yellow. 6 metres (enough for 50+ installations) of Yellow Stranded 32 gauge Decoder wire.

Cobalt Value Pack (Selection of parts and accessories)A combination of tools, accessories and spare parts to make installation Cobalt Motors easy a...

Micro harness 2-way. Pack of 4.

Cobalt Alpha DCC Power Bus Driver and SNIFFER AdapterThe Alpha Sniffer is a simple and economical way to add a separate DCC accessory power bus to ...

SIX plug & play pre-wired switches – red Mimic LEDs – (pre-terminated plug-in LEDs).Please use with an SPS-12 split-rail power supply.

Mimic Extension Lead Connectors – sold in packs of six, this is the most basic “joiner” for connecting Alpha Mimic extension leads.Because control ...

A pack of 6 x daylight white ultra small pre-wired NANO LEDs. LEDs are 0.8mm x 0.7mm x 1mm. Wire is super-fine 150mm x 0.12mm. Packed with resistor...

TWIN Wire Decoder Stranded 6m (32g) Yellow/Blue6 metres of twinned Yellow and Blue Stranded 32 gauge Decoder wire – When it comes to installations,...

TWIN Wire Decoder Stranded 6m (32g) White / Blue6 metres of twinned White and Blue Stranded 32 gauge Decoder wire – When it comes to installations,...

TWIN Wire Decoder Stranded 6m (32g) Orange/Grey6 metres of twinned ORANGE and GREY Stranded 32 gauge Decoder wire – When it comes to installations,...

Decoder Wire - Stranded 6m (32g) Grey. 6 metres (enough for 50+ installations) of Grey Stranded 32 gauge Decoder wire.

Decoder Wire - Stranded 6m (32g) Blue. 6 metres (enough for 50+ installations) of Blue Stranded 32 gauge Decoder wire.

The DCCconcepts DCC-LSP Surge Protector effectively buffers power turn-on surges and helps to minimise annoying fast momentum short circuits that c...

Pack of 50 ‘DCC-Tags’. There is no easier way to mount and secure the power bus (With ZERO need for cutting) than with these tags. Left and right p...

Model railway electrics are often seen as something of a dark art in the world of railway modelling, but there’s really no need to be intimidated b...

This module allows you to convert signals to DCC operation. This unit is quick and easy to connect up to existing signals on your railway and with ...

Decoder Wire - Stranded 6m (32g) Orange. 6 metres (enough for 50+ installations) of Orange Stranded 32 gauge Decoder wire.

12v Split-Supply PCB only.Use this PCB with your own power supplies to create a split-rail power supply.

Power supply quality is really important, particularly with Digital products, so we are really pleased to offer these exceptional 18v, 2 amp power ...

Alpha Mimic Panel Controller (with Red+Green LEDs). The easiest panel wiring you will ever do! Why run endless meters of cable from every turnout o...