DCC Accessories

One Cobalt iP Digital “Intelligent Power” DCC Digital Turnout Motor with all installation accessories including mounting screws and double-sided fo...

AE Model 6-Pin Direct 2 Function Decoder – Quality decoders at a sensible price. All AE decoders conform to NMRA and NEM standards. They are produc...

Brand: Hornby Part Number: R8232 Scale / Type: OO Scale To adapt Hornby points for use with DCC Systems

Decoder Wire -  Stranded 6m (32g) Black. 6 metres (enough for 50+ installations) of Black Stranded 32 gauge Decoder wire.

The DCC80 Autofrog is a simple switch that automatically changes the frog polarity on your DCC layout. In most situations, the use of electrofrog ...

Heat Shrink Black (36 Pack)Fine heat shrink is essential for decoder installations. There is enough in one pack for well over 150 joints.

Decoder Wire - Stranded 6m (32g) Red. 6 metres (enough for 50+ installations) of Red Stranded 32 gauge Decoder wire.

The DCC80 Autofrog is a simple switch that automatically changes the frog polarity on your DCC layout. In most situations, the use of electrofrog p...

Decoder Harness 8 Pin Female (200mm) (3 Pack)A pack of three 8 pin harnesses with a female socket to connect to NEM652/NMRA 8 pin decoders. Colour ...

The DCC93 is a 6 pin direct plug decoder which is most suited to N Scale locomotives. It can also be used in some HO/OO locomotives. FEATURES 2 Dig...

3-Wire RGB Ribbon (5m)A 5 metre length of 3-wire ribbon cable for interconnection of all 3-wire switching including Cobalt Alpha (red/green/black) ...

Heat ShrinkRed (36 Pack)Fine heat s hrink is essential for decoder installations. There is enough in one pack for well over 150 joints.

Cobalt-SS Crossover pack comprises 2 x Cobalt-SS and AccessoriesEach of the two independent outputs of the Cobalt-SS control board can actually pow...

Zen decoder software has always been smooth, clever and easy to use but our new decoder range takes this to a new level, with super-advanced brown-...

Six Cobalt iP Digital “Intelligent Power” DCC Digital Turnout Motors with all installation accessories including mounting screws and double-sided f...

Model Railway Solutions Laser cut Plywood Controller Holder to suit Gaugemaster Combi

Zen decoder software has always been smooth, clever and easy to use but our new BLACK decoder range takes this to a new level, with extended and im...

Zen Series Stay Alive Standard Slimline Installation is easy – just match the blue and black wires to the blue and black stay-alive wires already a...

Loco & Rolling Stock Lamps As with all things in the hobby, detail matters. In the real world, no Steam locomotive or early diesel loco ever ra...

Zen decoder software has always been smooth, clever and easy to use but our new decoder range takes this to a new level, with super-advanced brown-...

AE Model 21-Pin Direct 6 Function Decoder (4 powered / 2 logic) – Quality decoders at a sensible price. With "Plug and Play" Stay Alive connection....

Cobalt DCP-CBSS-2 Pack – Small, Reliable, Super-Smooth Above-Board Turnout Motors, ready for DC or DCC use. This pack contains 2x Cobalt-SS Above-B...

TWIN Wire Decoder Stranded 6m (32g) Red / Black6 metres of twinned Red and Black Stranded 32 gauge Decoder wire – When it comes to installations, t...

Micro harness 4-way. Pack of 3.

Enables locomotives without decoder sockets to have an 8-pin decoder socket fixed to them.   Socket Dimensions: 10mm x 10mm x 5mmCable Length: 90mm...

RJ12 6pin Curly Cord For NCE Powercab and Cobalt Alpha – 2m/6ftCan also be used for NCE Procab connections.2m/6ft curly cable with RJ12 connectors ...

Decoder Wire - Stranded 6m (32g) Yellow. 6 metres (enough for 50+ installations) of Yellow Stranded 32 gauge Decoder wire.

Accessory Decoder CDU Solenoid Drive SX 4-Way with Power-Off Memory and Protective CaseADS-4sx is an easy-to-use 4-way DCC accessory decoder for so...

Enables a suitable 6-pin DCC Decoder to be used in up to 3 locomotives fitted with 8-pin sockets. Socket Dimensions: 11mm x 7mm x 2mm Cable Len...

Zen decoder software has always been smooth, clever and easy to use but our new decoder range takes this to a new level, with simple-to-use ONE ste...

6-function 21 to 8 Pin Adapter (3 Pack)Three 21 to 8 pin adapters, making it easy for you to fit an NEM652 8 pin NMRA plug fitted decoder into a lo...

Six Cobalt iP Digital “Intelligent Power” DCC Digital Turnout Motors with all installation accessories including mounting screws and double-sided f...

Micro harness 2-way. Pack of 4.

Cobalt Alpha DCC Power Bus Driver and SNIFFER AdapterThe Alpha Sniffer is a simple and economical way to add a separate DCC accessory power bus to ...

Accurathrash DCC Sound Speaker (Pack of 1) Add full bodied sound to your Accurascale diesel and electric DCC ready locomotives. Photos show the spe...

Cobalt Value Pack (Selection of parts and accessories) A combination of tools, accessories and spare parts to make installation Cobalt Motors easy ...

SIX plug & play pre-wired switches – red Mimic LEDs – (pre-terminated plug-in LEDs).Please use with an SPS-12 split-rail power supply.

Mimic Extension Lead Connectors – sold in packs of six, this is the most basic “joiner” for connecting Alpha Mimic extension leads.Because control ...

TWIN Wire Decoder Stranded 6m (32g) Yellow/Blue6 metres of twinned Yellow and Blue Stranded 32 gauge Decoder wire – When it comes to installations,...

Scenic Sounds Modules bring life to any layout!Sound can really bring a layout to life and these new modules make it so easy; just connect two wire...

Something special for those who find soldering complex wiring difficult: Three complete harnesses for Cobalt-S levers complete with 9-way spring co...

Longer than the standard Prodigy lead, this useful item can be used with Extension Plates, Walkarounds and the Booster unit to give you even more f...

AE Model Next-18 4 Function Decoder – Quality decoders at a sensible price. All AE decoders conform to NMRA and NEM standards. They are produced to...

The DCCconcepts DCC-LSP Surge Protector effectively buffers power turn-on surges and helps to minimise annoying fast momentum short circuits that c...

Pack of 50 ‘DCC-Tags’. There is no easier way to mount and secure the power bus (With ZERO need for cutting) than with these tags. Left and right p...