Layout Control

Zen decoder software has always been smooth, clever and easy to use but our new BLACK decoder range takes this to a new level, with extended and im...

Designed to fit the Kato N scale EMD Class 66, GG1 and DD51 locomotives

14 to 128 driving steps, 2- and 4-digit addresses. Up to 20 functions can be triggered. Thanks to RailComPlus®, the decoders log in fully automatic...

A single large Stay-Alive with 3-wire connections to the decoder. Totally Plug and Play with Zen decoders. Usable with Zen Black, Zen Blue+, Lenz a...

A 4mm scale 4 aspect colour light signal complete with an interface board and an integral DCC Decoder. It can also be used with DC power sources.

A single medium Stay-Alive with 3-wire connections to the decoder. Totally Plug and Play with Zen decoders. Usable with Zen Black, Zen Blue+, Lenz ...

The DCC92 is a 8 pin decoder with a fitted 45mm harness between the pins and the decoder. An ideal decoder for retrofitting into non DCC Ready loco...

The DCC93 is a 6 pin direct plug decoder which is most suited to N Scale locomotives. It can also be used in some HO/OO locomotives. FEATURES 2 Dig...

A single small Stay-Alive with 3-wire connections to the decoder. Totally Plug and Play with Zen decoders. Usable with Zen Black, Zen Blue+, Lenz a...

SIX plug & play pre-wired switches – green Mimic LEDs – (pre-terminated plug-in LEDs).Please use with an SPS-12 split-rail power supply.

DH165A0 fits Athearn Genesis, Kato, Stewart, Atlas & Other HO Locomotives.Compatible with Sound Bug Sound Only Decoders Decoder Lock equipped.P...

DH165K1A fits many Kato HO Diesel Locomotives.Compatible with Digitrax Sound Bug Decoder Lock equipped.Physical Size 2.877” x .667” x .173” 73.076 ...

The 4-pin decoder, previously only available as a spare (X9659), is compatible with the 0-4-0 W4 Peckett from the 2020 range. Also suitable for Sen...

The DCCconcepts DCC-LSP Surge Protector effectively buffers power turn-on surges and helps to minimise annoying fast momentum short circuits that c...

Zen ZNSSA SUPER high power stay alive has exceptional power storage.In fact, once charged, they have enough power to run an average OO or HO Locomo...

Enables a suitable 6-pin DCC Decoder to be used in up to 3 locomotives fitted with 8-pin sockets. Socket Dimensions: 11mm x 7mm x 2mm Cable Len...

50347 ESU LokSound V5, 22mm x 42mm x 8mm, 8 Ohms, Bass ReflexThis new speaker module fits wherever 20mm x 40mm rectangular speakers were previously...

50346 ESU LokSound V5, 24mm x 55mm x 8.6mm, 8 Ohms, Bass ReflexThis loudspeaker module is suitable for large tenders with gauge H0 or OO or models ...

50344 ESU LokSound V5, 24mm x 55mm x 8.6mm, 4 Ohms, Bass ReflexThis loudspeaker module is suitable for large tenders with gauge H0 or OO or models ...

50349 ESU LokSound V5, 28mm Diameter x 4mm, 4 Ohms, Bass ReflexThis round speaker module can replace a regular 28mm round speaker in most cases. Wi...

50348 ESU LokSound V5, 18mm x 35mm x 11mm, 4 Ohms, Bass ReflexThis speaker module offers extremely good performance data with moderate dimensions. ...

50345 ESU LokSound V5, 22mm x 42mm x 8mm, 4 Ohms, Bass ReflexThis new speaker module fits wherever 20mm x 40mm rectangular speakers were previously...

Plug and Play Universal fascia panel supporting LocoNet. Two RJ12 front panel Throttle jacks. Three RJ12 rear pass-through LocoNet jacks Suppo...

AE Model 2-Wire Stay Alive for connection to AE Model Decoders including plug-and-play connector. Also compatible with Hornby TXS (HM7000) decoder...

Bachmann 6 Pin Decoder Socket With Wiring Harness Packet of 3

O Gauge, N Guage and OO Gauge Signal Interface for DCC or Analogue Operation.

Includes 3 Signal Masts that can be used as Signal Mast Bases in any scale or can be painted and detailed and used as N-scale signal masts.Scale: A...

Cobalt Value Pack (Selection of parts and accessories)A combination of tools, accessories and spare parts to make installation Cobalt Motors easy a...

N Scale 3 Aspect Colour Light Signal - Yellow/Green/Yellow Aspects

Cobalt Value Pack (Selection of parts and accessories) A combination of tools, accessories and spare parts to make installation Cobalt Motors easy ...

Decoder Harness 8 Pin Female (200mm) (3 Pack)A pack of three 8 pin harnesses with a female socket to connect to NEM652/NMRA 8 pin decoders. Colour ...

Model Railway Solutions Laser cut Plywood Controller Holder to suit Gaugemaster Combi

Decoder Harness 6 Pin Female (150mm) (3 Pack)A pack of three 6 pin harnesses with a female socket to connect to NEM651 / NMRA 6 pin decoders. Colou...

Cobalt Right-Angle Adapters w/Mounting Hardware (3 Pack) The Cobalt right-angle adapter will allow you to install your Cobalt motors horizontally, ...

Something special for those who find soldering complex wiring difficult: Three complete harnesses for Cobalt-S levers complete with 9-way spring co...

6-function 21 to 8 Pin Adapter (3 Pack)Three 21 to 8 pin adapters, making it easy for you to fit an NEM652 8 pin NMRA plug fitted decoder into a lo...

NANOlight with resistors. 6x (2-Colour) Red/Green. A pack of 6 x red/green ultra small pre-wired NANO LEDs. LEDs are 0.8mm x 0.7mm x 1mm. 3 wires, ...

A pack of 6 x Prototype white/red ultra small pre-wired NANO LEDs. LEDs are 0.8mm x 0.7mm x 1mm. 3 wires, common positive. Wire is super-fine 150mm...

This is an incredibly useful product that offers the modeller a decoder testing facility in a non railway environment which can be vital before a c...

Cobalt Mounting Foam Pads (12 Pack)Twelve custom cut double sided foam mounting pads and specially prepared, “selectively glued,” colour-printed ba...

A pack of three 8-pin harnesses to fit direct plug 6-pin decoders. NEM652 8-pin plug to 6-pin NEM651 socket harness.

Micro harness SET. One each 2/4/6/8 way.

Installation PCBs 25x10mm (w/Screws) (12 Pack)Twelve really handy mini PCBs to help you keep complex installations neat and tidy. Supplied with 24 ...

The DCC80 Autofrog is a simple switch that automatically changes the frog polarity on your DCC layout. In most situations, the use of electrofrog ...

This superb and easy-to-use kit contains everything you need to accurately position DCCconcepts under-board Cobalt motors on your layout.It include...

NANOlight (with resistors) 6 x (1-Colour) Amber. A pack of 6 x amber ultra small pre-wired NANO LEDs. LEDs are 0.8mm x 0.7mm x 1mm. Wire is super-f...