Layout Control

A pack of 6 x signal red ultra small pre-wired NANO LEDs. LEDs are 0.8mm x 0.7mm x 1mm. Wire is super-fine 150mm x 0.12mm. Packed with resistor sel...

A pack of 6 x daylight white ultra small pre-wired NANO LEDs. LEDs are 0.8mm x 0.7mm x 1mm. Wire is super-fine 150mm x 0.12mm. Packed with resistor...

3-Wire RGB Ribbon (5m)A 5 metre length of 3-wire ribbon cable for interconnection of all 3-wire switching including Cobalt Alpha (red/green/black) ...

RJ12 6pin Curly Cord For NCE Powercab and Cobalt Alpha – 2m/6ftCan also be used for NCE Procab connections.2m/6ft curly cable with RJ12 connectors ...

Enables locomotives without decoder sockets to have an 8-pin decoder socket fixed to them.   Socket Dimensions: 10mm x 10mm x 5mmCable Length: 90mm...

Fits many HO, O & G Scale installations. 53mm x 18mm x 14mm. 8 Ohms, 1/2 watt ratings. Acoustically matched enclosure included for best sound l...

12v Split-Supply PCB only.Use this PCB with your own power supplies to create a split-rail power supply.

Micro harness 6-way. Pack of 2.

Micro harness 8-way. pack of 1.

Micro harness 4-way. Pack of 3.

Micro harness 2-way. Pack of 4.

Alpha AEU-Alpha Switch Wires – Pre-cut and tinned to make connection to Alpha AEU even easier!A pack of 12 ready to use Red, Green and Black wires ...

Longer than the standard Prodigy lead, this useful item can be used with Extension Plates, Walkarounds and the Booster unit to give you even more f...

50332 ESU LokSound V4.0 inc Micro, 23mm Diameter, 4 Ohms, 1~2W, with Sound Chamber When selecting the loudspeaker the used decoder type is importan...

SP282832 - Round 28mm 32 Ohm Speaker with wires. Great for HO installations.Used on current production SFX004, SFX064D, SDH164D & SDH164K1A sou...

RD2 Remote Sensing Diodes for BDL16 series occupancy detectorsRemote sensing of 2 detection sections. Eliminates the need for long runs of heavy ga...

Loksound 4 ohm rectangular speaker 20 x 40 mm with enclosure

Cobalt Tiebar Labels (12 Pack) Usable with and highly recommended for all Cobalt variants. Twelve specially prepared, “selectively glued,” colou...

The LT1 is included with all Digitrax Starter Sets. It consists of a harness with 6 conductor Telco type wire with a male plug, a tester with a fem...

TWIN Wire Decoder Stranded 6m (32g) Brown/Brown6 metres of twinned BROWN and BROWN Stranded 32 gauge Decoder wire – When it comes to installations,...

Alpha Switch Extension Wire – Supplied with heat shrink, this will give those who like to solder an economical way to extend Alpha Switch connectio...

TWIN Wire Decoder Stranded 6m (32g) White / Blue6 metres of twinned White and Blue Stranded 32 gauge Decoder wire – When it comes to installations,...

TWIN Wire Decoder Stranded 6m (32g) Yellow/Blue6 metres of twinned Yellow and Blue Stranded 32 gauge Decoder wire – When it comes to installations,...

TWIN Wire Decoder Stranded 6m (32g) Green/Blue6 metres of twinned Green and Blue Stranded 32 gauge Decoder wire – When it comes to installations, t...

TWIN Wire Decoder Stranded 6m (32g) Orange/Grey6 metres of twinned ORANGE and GREY Stranded 32 gauge Decoder wire – When it comes to installations,...

Decoder Wire -  Stranded 6m (32g) Black. 6 metres (enough for 50+ installations) of Black Stranded 32 gauge Decoder wire.

Decoder Wire - Stranded 6m (32g) White. 6 metres (enough for 50+ installations) of White Stranded 32 gauge Decoder wire.

Decoder Wire - Stranded 6m (32g) Purple. 6 metres (enough for 50+ installations) of Purple Stranded 32 gauge Decoder wire.

Decoder Wire - Stranded 6m (32g) Pink. 6 metres (enough for 50+ installations) of Pink Stranded 32 gauge Decoder wire.

Decoder Wire - Stranded 6m (32g) Yellow. 6 metres (enough for 50+ installations) of Yellow Stranded 32 gauge Decoder wire.

Decoder Wire - Stranded 6m (32g) Orange. 6 metres (enough for 50+ installations) of Orange Stranded 32 gauge Decoder wire.

Decoder Wire - Stranded 6m (32g) Red. 6 metres (enough for 50+ installations) of Red Stranded 32 gauge Decoder wire.

Heat Shrink Clear (36 Pack)Fine heat shrink is essential for decoder installations. There is enough in one pack for well over 150 joints.

Heat ShrinkRed (36 Pack)Fine heat s hrink is essential for decoder installations. There is enough in one pack for well over 150 joints.

Decoder Wire - Stranded 6m (32g) Orange. 6 metres (enough for 50+ installations) of Orange Stranded 32 gauge Decoder wire.

TWIN Wire Decoder Stranded 6m (32g) Purple/Blue6 metres of twinned Purple and Blue Stranded 32 gauge Decoder wire – When it comes to installations,...

Decoder #wire - Stranded 6m (32g) Brown. 6 metres (enough for 50+ installations) of Brown Stranded 32 gauge Decoder wire.

Loco Net Cable 1 mtr