Layout Control

The DCCconcepts DCC-LSP Surge Protector effectively buffers power turn-on surges and helps to minimise annoying fast momentum short circuits that c...

PowerBase Starter Kit OO/HO ScaleFor OO/HO and larger scales. Contains approx. 2.5 Metres of PowerBase Centipede Plates, 6 magnets and 6+ housings,...

18 strand cable ideal for wiring model Railways & similar applications:Rated: 1.4A @ 1000v MaxOutside Diameter: 1.0mm

18 strand cable ideal for wiring model Railways & similar applications:Rated: 1.4A @ 1000v MaxOutside Diameter: 1.0mm

18 strand cable ideal for wiring model railways & similar applications:Rated: 1.4A @ 1000v MaxOutside Diameter: 1.0mm

18 strand cable ideal for wiringModel Railways & similar applications:Rated: 1.4A @ 1000v MaxOutside Diameter: 1.0mm

18 strand cable ideal for wiring model Railways & similar applications:Rated: 1.4A @ 1000v MaxOutside Diameter: 1.0mm

18 strand cable ideal for wiringModel Railways & similar applications:Rated: 1.4A @ 1000v MaxOutside Diameter: 1.0mm

Brand: Gaugemaster Part Number: TLU Scale / Type: HO / OO Scales Our Code: GMC-TLU This uncoupler is designed for use with Hornby style O...

Plug and Play Universal fascia panel supporting LocoNet. Two RJ12 front panel Throttle jacks. Three RJ12 rear pass-through LocoNet jacks Suppo...

This pack contains 10x reed switches and 5x magnets of varying sizes for use with model railways. This product is included in our extensive Gaugem...

DCC & DC Fitted Block Occupancy Detector 

PowerBase Starter Kit N Scale.For N or TT scale & Narrow Gauge. PowerBase extension pack. Contains approx. 2.5 Metres of PowerBase Centipede Pl...

O Gauge, N Guage and OO Gauge Signal Interface for DCC or Analogue Operation.

Berko yard lamps are fitted with LED's and use a maximum voltage of 12volts DC.

Includes 3 Signal Masts that can be used as Signal Mast Bases in any scale or can be painted and detailed and used as N-scale signal masts.Scale: A...

Cobalt Value Pack (Selection of parts and accessories)A combination of tools, accessories and spare parts to make installation Cobalt Motors easy a...

N Scale 3 Aspect Colour Light Signal - Yellow/Green/Yellow Aspects

Brand: Train Tech Part Number: SL60 Scale / Type: HO / OO Scales Our Code: TTSL60 The Smart Light developed by Train Tech is a new system...

This point motor passing contact switch in black supplies the brief pulse of current that a point motor requires. The switch also comes supplied wi...

Designed to divert power from one circuit to another - eg. with R406 coloured light signals to switch from red to green and back again. It may also...

Momentary action - toggle springs back to centre (off) position when released.Ideal for operating solenoid motors, such as point motors used on mod...

The LED's work on a maximum voltage of 12volts DC.

Three spare harnesses and connection PCB’s for Cobalt-S wiring.

(Normally off or N.O. momentary type)These detectors have been designed to be very easy to install. Only 4mm in diameter, they will fit between the...

NANOlight with resistors. 6x (2-Colour) Red/Green. A pack of 6 x red/green ultra small pre-wired NANO LEDs. LEDs are 0.8mm x 0.7mm x 1mm. 3 wires, ...

A pack of 6 x Prototype white/red ultra small pre-wired NANO LEDs. LEDs are 0.8mm x 0.7mm x 1mm. 3 wires, common positive. Wire is super-fine 150mm...

Fascia mount Switch control device. Wire to DS74 input cable, or use DSXC4 for plug and play. Two color leds display current Switch state. Suppl...

The pack contains one N scale Buffer Stop and Light, which is ready to be situated on any section of track. No construction is required to install ...

Momentary action - toggle springs back to centre (off) position when released.Ideal for operating solenoid motors, such as point motors used on mod...

Pack of 5 DPDT Miniature switch. Centre off. 3 positions: ON/OFF/ON (H 9 x W13 x D 11.5mm)

Pack of 5 SPDT Sub Miniature switches. Centre off. 3 positions: ON/OFF/ON (H 8.64 x W 8.13 x D 5.08mm) Hole required: 4.5mm Rated: 5A/28v DC

Pack of 5 DPDT Sub Miniature switches. Centre off. 3 positions: ON/OFF/ON (H 8.64 x W 8.13 x D 9.14mm) Hole required: 4.5mm Rated: 5A/28v DC

Brand: Peco Part Number: PL-11 Scale / Type: HO / OO Scales Our Code: PL-11 Side mounted turnout motor. Designed to clip into the side ...

Provides the short burst of current needed to operate the PL-10 Turnout Motor. May be ganged using the Joining Bar PL-24

MEASUREMENTS LENGTH 27mm WIDTH 12mm DEPTH 12mm

Pack of 10 Push to Break (Black only)

Pack of 5 DPDT Sub Miniature switches.2 positions: ON/ON(H 8.64 x W 8.13 x D 9.14mm) Hole required: 4.5mm Rated: 5A/28v DC

OO Scale 3 Aspect R/Y/G Feather Right 18" Leads/Interface Board

OO Scale 3 Aspect R/Y/G Feather Left 18" Leads/Interface Board

Micro harness SET. One each 2/4/6/8 way.

Installation PCBs 25x10mm (w/Screws) (12 Pack)Twelve really handy mini PCBs to help you keep complex installations neat and tidy. Supplied with 24 ...

Brand: Peco Part Number: PL-51 Scale / Type: N / HO / OO / O Scales Our Code: PL-51

Brand: Peco Part Number: PL-26W Scale / Type: N / HO / OO / O Scales Our Code: PL-26W Provides a short burst of currents needed to oper...

Use this switch for controlling isolated sections of track or to operate accessories.

Brand: Peco Part Number: PL-26Y Scale / Type: N / HO / OO / O Scales Our Code: PL-26Y Provides a short burst of currents needed to oper...