Layout Control

Three spare harnesses and connection PCB’s for Cobalt-S wiring.

(Normally off or N.O. momentary type)These detectors have been designed to be very easy to install. Only 4mm in diameter, they will fit between the...

NANOlight with resistors. 6x (2-Colour) Red/Green. A pack of 6 x red/green ultra small pre-wired NANO LEDs. LEDs are 0.8mm x 0.7mm x 1mm. 3 wires, ...

A pack of 6 x Prototype white/red ultra small pre-wired NANO LEDs. LEDs are 0.8mm x 0.7mm x 1mm. 3 wires, common positive. Wire is super-fine 150mm...

Fascia mount Switch control device. Wire to DS74 input cable, or use DSXC4 for plug and play. Two color leds display current Switch state. Suppl...

The pack contains one N scale Buffer Stop and Light, which is ready to be situated on any section of track. No construction is required to install ...

Momentary action - toggle springs back to centre (off) position when released.Ideal for operating solenoid motors, such as point motors used on mod...

Pack of 5 DPDT Miniature switch. Centre off. 3 positions: ON/OFF/ON (H 9 x W13 x D 11.5mm)

Pack of 5 SPDT Sub Miniature switches. Centre off. 3 positions: ON/OFF/ON (H 8.64 x W 8.13 x D 5.08mm) Hole required: 4.5mm Rated: 5A/28v DC

Pack of 5 DPDT Sub Miniature switches. Centre off. 3 positions: ON/OFF/ON (H 8.64 x W 8.13 x D 9.14mm) Hole required: 4.5mm Rated: 5A/28v DC

Brand: Peco Part Number: PL-11 Scale / Type: HO / OO Scales Our Code: PL-11 Side mounted turnout motor. Designed to clip into the side ...

Provides the short burst of current needed to operate the PL-10 Turnout Motor. May be ganged using the Joining Bar PL-24

MEASUREMENTS LENGTH 27mm WIDTH 12mm DEPTH 12mm

Pack of 10 Push to Break (Black only)

Pack of 5 DPDT Sub Miniature switches.2 positions: ON/ON(H 8.64 x W 8.13 x D 9.14mm) Hole required: 4.5mm Rated: 5A/28v DC

OO Scale 3 Aspect R/Y/G Feather Right 18" Leads/Interface Board

OO Scale 3 Aspect R/Y/G Feather Left 18" Leads/Interface Board

Micro harness SET. One each 2/4/6/8 way.

Installation PCBs 25x10mm (w/Screws) (12 Pack)Twelve really handy mini PCBs to help you keep complex installations neat and tidy. Supplied with 24 ...

Brand: Peco Part Number: PL-51 Scale / Type: N / HO / OO / O Scales Our Code: PL-51

Brand: Peco Part Number: PL-26W Scale / Type: N / HO / OO / O Scales Our Code: PL-26W Provides a short burst of currents needed to oper...

Use this switch for controlling isolated sections of track or to operate accessories.

Brand: Peco Part Number: PL-26Y Scale / Type: N / HO / OO / O Scales Our Code: PL-26Y Provides a short burst of currents needed to oper...

Provides the short burst of current required to operate the PL-11 and PL-10 series of Turnout Motors. The PL-31 Connectors are ideal for attaching ...

Brand: Train Tech Part Number: SE1 Scale / Type: OO Scale Our Code: SE1 SE1 - Smart Screen Enclosure - pack of 2 3D Printed housing for y...

Brand: Peco Part Number: PL-80 Scale / Type: HO / OO Scales Our Code: PL80 These new Power Feed Joiners will help address the worries o...

Pack of 5 DPDT Miniature switches 2 positions: ON/ON H 9mm x W 13 mm x D 11.5mm Hole required: 6.35mm Rated: 5A/28v DC

These new Power Feed Joiners will help address the worries of soldering that many modellers' have: they're the safe, clean and tidy way of bringing...

Pack of 5 SPDT Sub Miniature switches. 2 postions: ON/ON (H 8.64 x W 8.13 x D 5.08mm) Hole required: 4.5mm Rated: 5A/28v DC

Dimensions: 28mm long 10mm Diameter Hole reqd: 7mm

Copper Tape (For Bus Bars) 10m x 12mm Current rating 5 amp

These new Power Feed Joiners will help address the worries of soldering that many modellers' have: they're the safe, clean and tidy way of bringing...

NANOlight (w/resistors) 6x (1-Colour) Signal Green.A pack of 6 x signal green ultra small pre-wired NANO LEDs. LEDs are 0.8mm x 0.7mm x 1mm. Wire i...

NANOlight (with resistors) 6 x (1-Colour) Amber. A pack of 6 x amber ultra small pre-wired NANO LEDs. LEDs are 0.8mm x 0.7mm x 1mm. Wire is super-f...