Layout Control

Brand: Train Tech Part Number: SE1 Scale / Type: OO Scale Our Code: SE1 SE1 - Smart Screen Enclosure - pack of 2 3D Printed housing for y...

Brand: Peco Part Number: PL-80 Scale / Type: HO / OO Scales Our Code: PL80 These new Power Feed Joiners will help address the worries o...

Pack of 5 DPDT Miniature switches 2 positions: ON/ON H 9mm x W 13 mm x D 11.5mm Hole required: 6.35mm Rated: 5A/28v DC

These new Power Feed Joiners will help address the worries of soldering that many modellers' have: they're the safe, clean and tidy way of bringing...

Pack of 5 SPDT Sub Miniature switches. 2 postions: ON/ON (H 8.64 x W 8.13 x D 5.08mm) Hole required: 4.5mm Rated: 5A/28v DC

Dimensions: 28mm long 10mm Diameter Hole reqd: 7mm

Copper Tape (For Bus Bars) 10m x 12mm Current rating 5 amp

These new Power Feed Joiners will help address the worries of soldering that many modellers' have: they're the safe, clean and tidy way of bringing...

NANOlight (w/resistors) 6x (1-Colour) Signal Green.A pack of 6 x signal green ultra small pre-wired NANO LEDs. LEDs are 0.8mm x 0.7mm x 1mm. Wire i...

NANOlight (with resistors) 6 x (1-Colour) Amber. A pack of 6 x amber ultra small pre-wired NANO LEDs. LEDs are 0.8mm x 0.7mm x 1mm. Wire is super-f...

A pack of 6 x signal red ultra small pre-wired NANO LEDs. LEDs are 0.8mm x 0.7mm x 1mm. Wire is super-fine 150mm x 0.12mm. Packed with resistor sel...

A pack of 6 x daylight white ultra small pre-wired NANO LEDs. LEDs are 0.8mm x 0.7mm x 1mm. Wire is super-fine 150mm x 0.12mm. Packed with resistor...

3-Wire RGB Ribbon (5m)A 5 metre length of 3-wire ribbon cable for interconnection of all 3-wire switching including Cobalt Alpha (red/green/black) ...

RJ12 6pin Curly Cord For NCE Powercab and Cobalt Alpha – 2m/6ftCan also be used for NCE Procab connections.2m/6ft curly cable with RJ12 connectors ...

Extension Wire is Just Plug-compatible and has soft insulation for easy stripping. Paired wire is color-coded for proper connection with Splicer Pl...

Brand: Peco Part Number: PL-23 Scale / Type: N / HO / OO / O Scales Our Code: PL-23 Single pole change over switch. Use this switch to co...

Brand: Hornby Part Number: R8232 Scale / Type: OO Scale To adapt Hornby points for use with DCC Systems

3 Pin mains plug and cable for use with the DCC63 Switch Mode Power Supply. This mains lead is fitted with a figure 8 plug ready to plug into the t...

Pack of 5 SPDT Miniature Changeover switches. Centre Off. 3 postions: ON/OFF/ON H 9mm x W 13mm x D 7mm) Hole required: 6.35mm Rated: 5A/28v DC

Self Adhesive.5mm x 25 Metres.Ideal for wiring Dolls Houses, Model Railway Coaches etc.Can be soldered, we recommend the use of 77595 super flux ge...

Pack of 5 SPST Miniature switches. 2 positons: ON/OFF (H 9 x W 13 x D 7mm) Hole required: 6.35mm Rated: 5A/28v DC

Pack of 5 SPST Sub Miniature switches. 2 positons: ON/OFF (H 8.64 x W 8.13 x D 5.08mm) Hole required: 4.5mm Rated: 5A/28v DC

Pack of 5 SPDT Miniature Changeover switches. 2 postions: ON/ON (H 9 x W 13 x D 7mm) Hole required: 6.35mm (Rated: 5A/28v DC) 

Enables locomotives without decoder sockets to have an 8-pin decoder socket fixed to them.   Socket Dimensions: 10mm x 10mm x 5mmCable Length: 90mm...