Layout Control
Filters
-
Sale
DCC Concepts DCW-OGT 32 Gauge Twinned Decoder Wire (6 metres) - Orange / Grey
DCC Concepts£4.95| /TWIN Wire Decoder Stranded 6m (32g) Orange/Grey6 metres of twinned ORANGE and GREY Stranded 32 gauge Decoder wire – When it comes to installations,...
View full details£4.95| /Sale -
Sale
Peco PL-31 Push On Connectors/Shrouds (Pack contains 10 Connectors / 5 Shrouds)
Peco£4.75| /Push on Terminal Connectors and shrouds. These connectors make modification and fault finding so much easier than soldered wiring. Use them to conn...
View full details£4.75| /Sale -
Sale
£4.75| /Sale -
Sale
£4.75| /Sale -
Sale
Gaugemaster GM522 Rotary Switch 4 Pole 3 Way
Gaugemaster£4.65| /Brand: Gaugemaster Part Number: GM522 Scale / Type: Z / N / TT / HO / OO / O / Gauge 1 / G / Slot Cars 4 Pole 3 Way switch, this switch can...
View full details£4.65| /Sale -
Sale
Hornby Skaledale R8949 Lighting Double Sockets x 2
Hornby£4.50| /R8949 Hornby Skale Lighting Double Sockets pack 2 By using the simple combination of plugs, sockets and leads a Skaledale street, village or town c...
View full details£4.50| /Sale -
Sale
Expo A25240 Pack of 2 Clear 5mm LED with Resistors
Expo£4.50| /2 x Clear (White) 5mm LED -for 4-5volt operation, but supplied with the correct resistor for 12 volt operation.
£4.50| /Sale -
Sale
Peco PL-29 1/4 Watt, 1000 Ohm Resistors (10 Pk) for use with PL-30 LED'S
Peco£4.50| /If using LEDs for any other application on the layout that doesn't involve SmartSwitch, then these resistors should be connected to each LED (the l...
View full details£4.50| /Sale -
Sale
Gaugemaster GM519 Rotary Switch 1 Pole 12 Way
Gaugemaster£4.25| /This 1 Pole 12 Way switch can control a single wire input and give you the option to activate up to 12 outputs. It can be used for isolating sectio...
View full details£4.25| /Sale -
Sale
Gaugemaster GM518 A6 Minature "Push to Make" Switches - Yellow(5 per pack)
Gaugemaster£4.25| /This pack contains 5 switches in yellow. Single pole non-latching push to make switch. Ideally used to activate point motors and relays. MEASUREMEN...
View full details£4.25| /Sale -
Sale
Peco ST-9 Power Connecting Clips x 4 - N Gauge
Peco£4.00| /Brand: Peco Part Number: ST-9 Scale / Type: N Scale Our Code: ST-9 PECO Setrack N Gauge Code 80 - Unit trackage System The high quality r...
View full details£4.00| /Sale -
Sale
M.R.S. Grain of Wheat Bulbs - Various (Pk 5)
Model Railway Solutions£3.95| /Grain Of Wheat Bulbs Pack of 5Available in Red / Blue / White / Green / YellowOverall length of wire is 8 inches
£3.95| /Sale -
Sale
Gaugemaster Electric GM539 Bezels 5mm (12 pack)
Gaugemaster£3.95| /This is a great item if you want a professional look to the installation of an LED in a panel on your layout. Once a hole is drilled, in the panel...
View full details£3.95| /Sale -
Sale
DCC Concepts DCC-HS SET Heatshrink 1mm (36 pieces per pack)
DCC Concepts£3.95| /Heat Shrink Assorted Colours (36 Pack)An assorted pack of 36pcs total covering all small heatshrink colours. Fine heatshrink is essential for decod...
View full details£3.95| /Sale -
Sale
DCC Concepts DCW-32BK Decoder Wire - Stranded 6m (32g) - Black
DCC Concepts£3.95| /Decoder Wire - Stranded 6m (32g) Black. 6 metres (enough for 50+ installations) of Black Stranded 32 gauge Decoder wire.
£3.95| /Sale -
Sale
DCC Concepts DCW-32WH Decoder Wire - Stranded 6m (32g) - White
DCC Concepts£3.95| /Decoder Wire - Stranded 6m (32g) White. 6 metres (enough for 50+ installations) of White Stranded 32 gauge Decoder wire.
£3.95| /Sale -
Sale
DCC Concepts DCW-32PP Decoder Wire - Stranded 6m (32g) - Purple
DCC Concepts£3.95| /Decoder Wire - Stranded 6m (32g) Purple. 6 metres (enough for 50+ installations) of Purple Stranded 32 gauge Decoder wire.
£3.95| /Sale -
Sale
DCC Concepts DCW-32PK Decoder Wire - Stranded 6m (32g) - Pink
DCC Concepts£3.95| /Decoder Wire - Stranded 6m (32g) Pink. 6 metres (enough for 50+ installations) of Pink Stranded 32 gauge Decoder wire.
£3.95| /Sale -
Sale
DCC Concepts DCW-32YL Decoder Wire - Stranded 6m (32g) - Yellow
DCC Concepts£3.95| /Decoder Wire - Stranded 6m (32g) Yellow. 6 metres (enough for 50+ installations) of Yellow Stranded 32 gauge Decoder wire.
£3.95| /Sale -
Sale
DCC Concepts DCW-32OR Decoder Wire - Stranded 6m (32g) - Orange
DCC Concepts£3.95| /Decoder Wire - Stranded 6m (32g) Orange. 6 metres (enough for 50+ installations) of Orange Stranded 32 gauge Decoder wire.
£3.95| /Sale -
Sale
DCC Concepts DCW-32RD Decoder Wire - Stranded 6m (32g) - Red
DCC Concepts£3.95| /Decoder Wire - Stranded 6m (32g) Red. 6 metres (enough for 50+ installations) of Red Stranded 32 gauge Decoder wire.
£3.95| /Sale -
Sale
DCC Concepts DCC-HS-CLR Heat Shrink - Clear - 1mm (36 pieces)
DCC Concepts£3.95| /Heat Shrink Clear (36 Pack)Fine heat shrink is essential for decoder installations. There is enough in one pack for well over 150 joints.
£3.95| /Sale -
Sale
DCC Concepts DCC-HS-RED Heat Shrink - Red - 1mm (36 pieces)
DCC Concepts£3.95| /Heat ShrinkRed (36 Pack)Fine heat s hrink is essential for decoder installations. There is enough in one pack for well over 150 joints.
£3.95| /Sale -
Sale
DCC Concepts DCW-32GR Decoder Wire - Stranded 6m (32g) - Green
DCC Concepts£3.95| /Decoder Wire - Stranded 6m (32g) Orange. 6 metres (enough for 50+ installations) of Orange Stranded 32 gauge Decoder wire.
£3.95| /Sale