Layout Control

Six Cobalt-S Signal Box Levers including all installation accessories.Cobalt-S Levers bring a sense of reality to the control of model railways. Th...

With the following contents, this set will get you underway with working rodding without the need for added parts.20x lengths of 250mm rodding50x ...

DCC Concepts Cobalt α Alpha AEU turns any form of standard switch into a digital control device, making it possible to create complex control panel...

An assortment of cranks with all types represented for those who want to experiment.Contains 10 cranks, rod end pockets, rivets and pins etc.

2 12v DC Split Power Supply Kit. (inc PCB and 2x Universal Wall Plugs) This DCCconcepts (+12 (0v) (-12) split-rail power supply kit includes 2x 1 a...

Rodding stools are surprisingly close together on the prototype so you will need lots for longer runs.This pack contains 100 ready-to-use cranks an...

The Rod only pack contains 40 250mm lengths of rodding, rod pockets and mounting rivets plus some turnout motor linkages.An ideal add-on for the fu...

Introducing Cobalt-iP Analog – Cobalt-iP Analog is a new Cobalt product that takes the very best features of Cobalt Classic-O and Cobalt Digital-iP...

Cobalt Alpha DCC Power Bus Driver and SNIFFER AdapterThe Alpha Sniffer is a simple and economical way to add a separate DCC accessory power bus to ...

Cobalt-SS Crossover pack comprises 2 x Cobalt-SS and AccessoriesEach of the two independent outputs of the Cobalt-SS control board can actually pow...

TwistLock a basic electric solenoid motor, for operating (in the main) turnouts. It is powered by a normal 16vDC supply (and can take up to 3 amps)...

Brand: Gaugemaster Part Number: GMC-PM10D Scale / Type: N / HO / OO / O Scales The very versatile PM10D Digital Solenoid The PM10D point mo...

One Cobalt-S Signal Box Lever including all installation accessories.Cobalt-S Levers bring a sense of reality to the control of model railways. The...

A pack of three double-crank brass compensating cranks (6.25mm post) plus fixing pins etc. Designed for our working rodding system these will find ...

Cobalt Relay Extension BoardCobalt REX is an infinitely flexible set of add-on changeover relays that can be operated all at once or in pairs. Coba...

For operating heavy duty point motors. The unit stores up power in capacitors and when a point motor is actuated, discharges in one big punch gi...

Electric turnout mechanism for Left hand turnouts. Suitable for N gauge turnouts without ballast bed. Double spool operation with end-off switching...

Electric turnout mechanism for right hand turnouts. Suitable for N gauge turnouts without ballast bed. Double spool operation with end-off switchin...

Cobalt Value Pack (Selection of parts and accessories) A combination of tools, accessories and spare parts to make installation Cobalt Motors easy ...

This point motor passing contact switch in black supplies the brief pulse of current that a point motor requires. The switch also comes supplied wi...

Cobalt Right-Angle Adapters w/Mounting Hardware (3 Pack) The Cobalt right-angle adapter will allow you to install your Cobalt motors horizontally, ...

Something special for those who find soldering complex wiring difficult: Three complete harnesses for Cobalt-S levers complete with 9-way spring co...

Powerful solenoid point motor for new model Hornby points that have the sliding bar mechanism. May be mounted above or below the baseboard (require...

10m of Red/Green/Black tripled wire. Ideal for model railway point motor use and helpful when trying to keep wiring tidy. Each wire includes 14 str...

Cobalt Mounting Foam Pads (12 Pack)Twelve custom cut double sided foam mounting pads and specially prepared, “selectively glued,” colour-printed ba...

Brand: Peco Part Number: PL-11 Scale / Type: HO / OO Scales Our Code: PL-11 Side mounted turnout motor. Designed to clip into the side ...

For fitting to turnout motor PL-10. easy to assemble unit with two microswitches to control the polarity of live frogs whilst simultaneously operat...

TwistLock is a basic electric solenoid motor, for operating (in the main) turnouts. It is powered by a normal 16vDC supply (and can take up to 3 am...

Brand: Peco Part Number: PL-51 Scale / Type: N / HO / OO / O Scales Our Code: PL-51

A pack of five extension pins suitable for Peco, Seep, Hornby and Hattons point motors. Each pack includes 5 extension pins and 5 joining collars.

This superb and easy-to-use kit contains everything you need to accurately position DCCconcepts under-board Cobalt motors on your layout.It include...

Provides the short burst of current required to operate the PL-11 and PL-10 series of Turnout Motors. The PL-31 Connectors are ideal for attaching ...

Brand: Peco Part Number: PL-26W Scale / Type: N / HO / OO / O Scales Our Code: PL-26W Provides a short burst of currents needed to oper...

Brand: Peco Part Number: PL-26Y Scale / Type: N / HO / OO / O Scales Our Code: PL-26Y Provides a short burst of currents needed to oper...

The DCC80 Autofrog is a simple switch that automatically changes the frog polarity on your DCC layout. In most situations, the use of electrofrog ...