Layout Control

6-function 21 to 8 Pin Adapter (3 Pack)Three 21 to 8 pin adapters, making it easy for you to fit an NEM652 8 pin NMRA plug fitted decoder into a lo...

NANOlight with resistors. 6x (2-Colour) Red/Green. A pack of 6 x red/green ultra small pre-wired NANO LEDs. LEDs are 0.8mm x 0.7mm x 1mm. 3 wires, ...

A pack of 6 x Prototype white/red ultra small pre-wired NANO LEDs. LEDs are 0.8mm x 0.7mm x 1mm. 3 wires, common positive. Wire is super-fine 150mm...

Contains Sandstone, Pale Limestone, Terra Cotta and Verdigris & Moss, as well as all the tools you need to apply the weathering powder to your...

A pack of three 8-pin harnesses to fit direct plug 6-pin decoders. NEM652 8-pin plug to 6-pin NEM651 socket harness.

Micro harness SET. One each 2/4/6/8 way.

Installation PCBs 25x10mm (w/Screws) (12 Pack)Twelve really handy mini PCBs to help you keep complex installations neat and tidy. Supplied with 24 ...

Modern Station Railings – Pack of 6 x 78mm and 2 end pieces for N Scale Picture shows the OO Scale version. DCC Concepts working in partnership wit...

Modern Station Railings – 4 Pack – Grey 4x 137mm railing lengths Total length 54.8cm Suitable for use with the Modern Station Platform Extension Pa...

500 hardened and gold plated pins for fixing of rod stools, track or many other things around the layout.Small and subtle but very strong, the gold...

Brass back-to-back gauge for modellers using NMRA standard PR25 and similar wheelsets running on Peco Code 75 or finer track (inc Shinohara) or run...

Brass back-to-back gauge for modellers using fine scale wheel standards (RP25-88, Gibson, Ultrascale, DCCconcepts Coach wheels).

Back to Back N Scale (Standard) 7.65mmBrass back-to-back gauge for modellers using N scale. – Set to the mid point of standards for universal succe...

A pack of five extension pins suitable for Peco, Seep, Hornby and Hattons point motors. Each pack includes 5 extension pins and 5 joining collars.

NANOlight (w/resistors) 6x (1-Colour) Signal Green.A pack of 6 x signal green ultra small pre-wired NANO LEDs. LEDs are 0.8mm x 0.7mm x 1mm. Wire i...

Pack of TWO solid brass power distribution bars. The hobby has looked for something like this at an affordable price for a very long time! DCCconce...

This superb and easy-to-use kit contains everything you need to accurately position DCCconcepts under-board Cobalt motors on your layout.It include...

NANOlight (with resistors) 6 x (1-Colour) Amber. A pack of 6 x amber ultra small pre-wired NANO LEDs. LEDs are 0.8mm x 0.7mm x 1mm. Wire is super-f...

A pack of 6 x signal red ultra small pre-wired NANO LEDs. LEDs are 0.8mm x 0.7mm x 1mm. Wire is super-fine 150mm x 0.12mm. Packed with resistor sel...

A pack of 6 x daylight white ultra small pre-wired NANO LEDs. LEDs are 0.8mm x 0.7mm x 1mm. Wire is super-fine 150mm x 0.12mm. Packed with resistor...

3-Wire RGB Ribbon (5m)A 5 metre length of 3-wire ribbon cable for interconnection of all 3-wire switching including Cobalt Alpha (red/green/black) ...

RJ12 6pin Curly Cord For NCE Powercab and Cobalt Alpha – 2m/6ftCan also be used for NCE Procab connections.2m/6ft curly cable with RJ12 connectors ...

300mm high quality track feed wires pre-soldered to Legacy Rail Joiners. Compatible with Code 75 track from Legacy and equivalent track from all ma...

300mm high quality track feed wires pre-soldered to Legacy Rail Joiners. Compatible with Code 100 track from Legacy and equivalent track from all m...

T-2.4D Tip – A medium D type tip for DCS-ST2080D. Tip face is a 2.4mm with both a ‘line’ and ‘face’ soldering area. This tip can be used for solder...

True-scale, high quality models of the Westinghouse EP Pneumatic Point Motor. Widely used in the UK, Australia and parts of Europe. These accurate ...

Alpha Mimic Extension Leads – 6pcs 150mm extension leads for Alpha Mimmic LEDs and Ground Signals.You will also need the DCD-MJ6 joiners.

Alpha Mimic Extension Leads – 300mm extension leads for Alpha Mimic LEDs and Ground Signals. (6 pieces)

12v Split-Supply PCB only.Use this PCB with your own power supplies to create a split-rail power supply.

Bullhead Fishplate 4mm scale, 25 pcs pack: These high quality 4mm scale rail joiners have been made to look as realistic as possible and include bo...

Micro harness 6-way. Pack of 2.

Micro harness 8-way. pack of 1.

Micro harness 4-way. Pack of 3.

Micro harness 2-way. Pack of 4.

Alpha AEU-Alpha Switch Wires – Pre-cut and tinned to make connection to Alpha AEU even easier!A pack of 12 ready to use Red, Green and Black wires ...

The solder that in combination with our Sapphire No Clean Flux, makes everyone an expert! Sapphire 179 solder is 0.6mm diameter solder which flows ...