Model Railways

33pages of track plans for the N Gauge modeller, Written by C J Freezer.

These coaches were constructed between 1890 and 1902 for rural duties, but lasted up until the 1950's on workmen's trains and the like. Glue, paint...

These coaches were constructed between 1890 and 1902 for rural duties, but lasted up until the 1950's on workmen's trains and the like. Glue, paint...

These coaches were constructed between 1890 and 1902 for rural duties, but lasted up until the 1950's on workmen's trains and the like. Glue, paint...

Brand: Peco Part Number: PL-10 Scale / Type: N / HO / OO / O Scales Our Code: PL-10 Standard motor. This is the most famous type of turno...

Brand: Peco Part Number: PL-10E Scale / Type: N / HO / OO / O Scales Our Code: PL-10E Motor with extened operating pin. Designed for use ...

Brand: Peco Part Number: PL-10 Scale / Type: N / HO / OO / O Scales Our Code: PL-10 Low current motor. This is version of the PL-10 is ...

Brand: Peco Part Number: PL-11 Scale / Type: HO / OO Scales Our Code: PL-11 Side mounted turnout motor. Designed to clip into the side ...

Brand: Peco Part Number: PL-12 Scale / Type: N / HO / OO / O Scales Our Code: PL-12 Can be used in association with most non-PECO turnout...

Ideal for modellers wishing to use the accessory with PECO turnouts. It will be especially useful in providing the means with which to mount a PL-1...

Brand: Peco Part Number: PL-13 Scale / Type: N / HO / OO / O Scales Our Code: PL-13 simple, inexpensive switch easily fitted underneath...

The Pecolectrics probe, used in conjunction with the PL-18 Studs and Tag Washers, gives the modeller a simple and convenient system by which to act...

This unit has a 12vDC 2 amp output with a 3-pin UK plug connected for mains supply. The output is via a 2-pin terminal block so will connect direct...

Use this switch to control the polarity on the N Gauge Code 55 SL-E383F Scissors Crossover.

Use this switch for controlling isolated sections of track or to operate accessories.

Brand: Peco Part Number: PL-23 Scale / Type: N / HO / OO / O Scales Our Code: PL-23 Single pole change over switch. Use this switch to co...

A useful remote operating feature for use with Peco N Gauge ELC couplings, or other N gauge couplings that do not incorporate a spring. 16 unobtrus...

Provides the short burst of current needed to operate the PL-10 Turnout Motor. May be ganged using the Joining Bar PL-24

Brand: Peco Part Number: PL-26W Scale / Type: N / HO / OO / O Scales Our Code: PL-26W Provides a short burst of currents needed to oper...

Brand: Peco Part Number: PL-26Y Scale / Type: N / HO / OO / O Scales Our Code: PL-26Y Provides a short burst of currents needed to oper...

Brand: Peco Part Number: PL-27 Scale / Type: N / HO / OO / O Scales Our Code: PL-27 Six-bay panel for use with the Peco clip-in switch...

Brand: Peco Part Number: PL-28 Scale / Type: N / HO / OO / O Scales Our Code: PL-28 6x mounting plate with screws. Mount your switches ...

If using LEDs for any other application on the layout that doesn't involve SmartSwitch, then these resistors should be connected to each LED (the l...

Handy for use with the Pecolectrics SmartSwitch these LEDs (Light Emitting Diodes) can be used to give a visual indication of the route set on a tu...

Push on Terminal Connectors and shrouds. These connectors make modification and fault finding so much easier than soldered wiring. Use them to conn...

Max rating @16volts (max) 2AMPS (continuous) or 2.5 amps (passing contact)

Brand: Peco Part Number: PL-34 Scale / Type: N / HO / OO / O Scales Our Code: PL-34 Wiring Harness to aid wiring Peco points. Pack contai...

Keep your wiring organised and tidy with these self adhesive clips. Pack of 20 clips

Invaluable wiring aid - no soldering required. 2 strips of 12 blocks, easily cut with a craft knife into smaller units. Use them when extending wir...

Brand: Peco Part Number: PL-50 Scale / Type: N / HO / OO / O Scales Our Code: PL-50

Brand: Peco Part Number: PL-51 Scale / Type: N / HO / OO / O Scales Our Code: PL-51

Peco are very happy to be able to offer a complementary motor for their popular turntable kits. Although these were never designed to be motorised ...

Brand: Peco Part Number: PL-64 Scale / Type: Z / N / TT / HO / OO / O / Gauge 1 / G Scales Our Code: PEPL-64 Pick-up and other elecrica...

Look after your model collection with this extremely useful kit, one handy pack has the things you need for basic cleaning and lubrication. The Kit...

These new Power Feed Joiners will help address the worries of soldering that many modellers' have: they're the safe, clean and tidy way of bringing...

These new Power Feed Joiners will help address the worries of soldering that many modellers' have: they're the safe, clean and tidy way of bringing...

Base unit for use with the PL-10E Turnout Motor. Fixing screws and full instructions included. PL-10E Turnout Motors PL-10WE Turnout Motors

Provides the short burst of current required to operate the PL-11 and PL-10 series of Turnout Motors. The PL-31 Connectors are ideal for attaching ...