as standard
as standard
Exclusively made for DCCconcepts. These super sharp cutters have a flat back for a perfect flush cut and have been hardened to the limits to stay s...
View full detailsOne Cobalt iP Digital “Intelligent Power” DCC Digital Turnout Motor with all installation accessories including mounting screws and double-sided fo...
View full detailsThe solder that in combination with our Sapphire No Clean Flux, makes everyone an expert! Sapphire 179 solder is 0.6mm diameter solder which flows ...
View full detailsDCCconcepts Sapphire No-Clean flux is an ideal companion that will make it possible for you to make perfect joints easily every time in electronics...
View full detailsIts not only HUGE (big enough for double track and more than 8x the cleaning area or otherbrands) – It is also the very best manual track cleaner a...
View full detailsDecoder Wire - Stranded 6m (32g) Black. 6 metres (enough for 50+ installations) of Black Stranded 32 gauge Decoder wire.
Exclusively made for DCCconcepts. The HTC is used to cut track that is already laid, and, because the cutting area is much larger when track is cut...
View full detailsHeat Shrink Black (36 Pack)Fine heat shrink is essential for decoder installations. There is enough in one pack for well over 150 joints.
Zen decoder software has always been smooth, clever and easy to use but our new BLACK decoder range takes this to a new level, with extended and im...
View full detailsZen decoder software has always been smooth, clever and easy to use but our new decoder range takes this to a new level, with simple-to-use ONE ste...
View full detailsWeathering Set: Locos and Wagons. This pack contains all the colours you’d find most useful when weathering wagons and locos. From creating rust a...
View full detailsExclusive to us! We had these sprue cutters made for us, and our brief to the manufacturer was to make them the best available. They succeeded and ...
View full detailsDecoder Wire - Stranded 6m (32g) Red. 6 metres (enough for 50+ installations) of Red Stranded 32 gauge Decoder wire.
DCCconcepts Sapphire No-Clean flux is an ideal companion that will make it possible for you to make perfect joints easily every time in electronics...
View full detailsHeat Shrink Assorted Colours (36 Pack)An assorted pack of 36pcs total covering all small heatshrink colours. Fine heatshrink is essential for decod...
View full detailsWeathering Set Track and Environs.This pack contains all the colours you’d find most useful to weather the track and surrounding areas.
Introducing Cobalt-iP Analog – Cobalt-iP Analog is a new Cobalt product that takes the very best features of Cobalt Classic-O and Cobalt Digital-iP...
View full detailsDecoder Harness 8 Pin Female (200mm) (3 Pack)A pack of three 8 pin harnesses with a female socket to connect to NEM652/NMRA 8 pin decoders. Colour ...
View full detailsTwo pack. Replacement for DCC-BT2.More a “DCC power management and control” device than a “Bus terminator”, the BSS.2 has several significant benef...
View full detailsHeat ShrinkRed (36 Pack)Fine heat s hrink is essential for decoder installations. There is enough in one pack for well over 150 joints.
3-Wire RGB Ribbon (5m)A 5 metre length of 3-wire ribbon cable for interconnection of all 3-wire switching including Cobalt Alpha (red/green/black) ...
View full detailsPre-Etched Sleepers 1.6mm (4mm scale) Straight Track.4mm scale UK prototype sleepering, pre-etched. This fret contains 80 sleepers for plain pointw...
View full detailsDCC concepts heavy duty BUS wire strippers are the best time saver ever! Save HOURS when installing the main power bus and if you plan well you can...
View full detailsBrass back-to-back gauge for Standard OO and HO ready to run, plus models built using BRSMB wheel standards OR running on pointwork built using OO-...
View full details