General Modelling

Mr. LEVELING THINNER is excellent for spray (airbrush) applicators. Mixing Mr. LEVELING THINNER into Mr. COLOR at a ratio of 1:1 or 1:2 improves co...

This is a thinner for airbrushing. Effective to make paints glossy. Use 1 part Mr Color to 1-2 parts Mr Color Levelling Thinner. If the spray does ...

Mr.THINNER is necessary to thin paints and wash brushes. Mr.THINNER is a high quality material, so it is easy to use and mix with Mr.COLOR.

High quality cleaning solution Use on all your brushes, airbrush equipment, jars and more Helps clean your equipment back to new and ready to bee u...

This is a black version of the Finishing Surfacer.This black base allows the omission of the painting of a black coat before applying a metallic co...

High quality cleaning solution Use on all your brushes, airbrush equipment, jars and more Helps clean your equipment back to new and ready to bee u...

A new type of pour on adhesive! Compared with previous pour on type adhesives, the drying speed has been dramatically improved and adhesive strengt...

Mr.THINNER is necessary to thin paints and wash brushes. Mr.THINNER is a high quality material, so it is easy to use and mix with Mr.COLOR.

Mr.THINNER is necessary to thin paints and wash brushes. Mr.THINNER is a high quality material, so it is easy to use and mix with Mr.COLOR.

Mr. Super Clear is a varnish for creating a perfect surface quality. It was specially designed for the C series paints (Mr.Color).

Mr.Cement is the appropriate liquid cement to use when you are looking to attach plastic parts together. It is the best choice when gluing together...

Topcoat is a coating for surface finish. Just blowing one at a time to the final finish of the painted model will show its effect. Since it is wate...

SETTER Decal setting solution – new formulae for even more effective decal application. Mr Mark Softer NEO is applied to the surface where the deca...

This is a surfacer with primer (base filling paint).The material used in Surfacer 1000, which is gaining overwhelming popularity for plastic models...

This thinnner contains alcohol for faster drying, though the Aqueous Hobby Color may be diluted with tap water. It also improve adhesion to the pai...

Mr. Top Coat is a clear coat suitable for finishing surfaces. Use it as the final finish on painted models. It is water based and may be applied to...

Black primer in spray, just as easy as shake and paint. Highly recommended as a base for metallic tones

Supplied in a 40ml jar, Mr. Surfacer 500 can be used straight from the jar using a spotter paintbrush, cotton swab/bud (que tip) or toothpick for f...

High quality primer for plastic model kits 40ml jar for painting with a brush or using with an airbrush If using with an airbrush, requires Mr Hobb...

Ideal storage vessel for mixing larger volumes of paint prior to application.

Mr.SURFACER 1000 contains finer granules than Mr.SURFACER 500. They are both used in much the same way but ,due to the finer granules after sanding...

This thinnner contains alcohol for faster drying, though the Aqueous Hobby Color may be diluted with tap water. It also improve adhesion to the pai...

Many modellers have had the experience of not only direct ultraviolet light from the sun but also indoor sources such as fluorescent light fading t...

This brings out a realistic felling better than a painted top coat. Mr.TOP COAT can be applied over slide marks(decals) without blemishes. A good w...

A range of surface primers that can be used as gap and seam fillers as well as primers used by model makers and sculptors. Many people think the Mr...

Mr Color Spray is the SPRAY version of Mr Color paints. They provide a very high-quality film finish. Highly recommended for the scale modeller.

This is a surfacer with primer (base filling paint).The material used in Surfacer 1000, which is gaining overwhelming popularity for plastic models...

Mr.THINNER is necessary to thin paints and wash brushes. Mr.THINNER is a high quality material, so it is easy to use and mix with Mr.COLOR.

A range of surface primers that can be used as gap and seam fillers as well as primers used by model makers and sculptors.Many people think the Mr....

Mr.SURFACER 1200 contains finer granules than Mr.SURFACER 1000. They are both used in much the same way.

Mr.Mark Softer is a softening agent designed to be used with decals (slidemarks). It enables decals to conform to rough and curved surfaces. How To...

Mr Color Spray is the SPRAY version of Mr Color paints. They provide a very high-quality film finish. Highly recommended for the scale modeller.

Mr.CEMENT is appropriate for attachment between plastic parts in models(sterol resin plastics). Mr.CEMENT has a suitable adhesion and strong streng...

Since it is white, Mr.WHITE SURFACER is used to modify plastic model parts that are black or dark in color. If this is used on the entire model, o...

A masking sol using a gum different from other types of masking sol to smooth out peeling after painting is finished. This new masking sol prevents...

A range of surface primers that can be used as gap and seam fillers as well as primers used by model makers and sculptors.Many people think the Mr....