DCC Accessories

Accessory Decoder CDU Solenoid Drive SX 4-Way with Power-Off Memory and Protective CaseADS-4sx is an easy-to-use 4-way DCC accessory decoder for so...

A pack of three 8-pin harnesses to fit direct plug 6-pin decoders. NEM652 8-pin plug to 6-pin NEM651 socket harness.

Enables a suitable 6-pin DCC Decoder to be used in up to 3 locomotives fitted with 8-pin sockets. Socket Dimensions: 11mm x 7mm x 2mm Cable Len...

Zen decoder software has always been smooth, clever and easy to use but our new decoder range takes this to a new level, with simple-to-use ONE ste...

Cobalt Value Pack (Selection of parts and accessories)A combination of tools, accessories and spare parts to make installation Cobalt Motors easy a...

6-function 21 to 8 Pin Adapter (3 Pack)Three 21 to 8 pin adapters, making it easy for you to fit an NEM652 8 pin NMRA plug fitted decoder into a lo...

Working Loco Lamps LNER/ER (4mm Scale) Red (6 Pack)A pack of six accurate 4mm scale rounded type LNER/ER working steam era locomotive lamps with wo...

Six Cobalt iP Digital “Intelligent Power” DCC Digital Turnout Motors with all installation accessories including mounting screws and double-sided f...

Micro harness 2-way. Pack of 4.

Cobalt Alpha DCC Power Bus Driver and SNIFFER AdapterThe Alpha Sniffer is a simple and economical way to add a separate DCC accessory power bus to ...

Accurathrash DCC Sound Speaker (Pack of 1) Add full bodied sound to your Accurascale diesel and electric DCC ready locomotives. Photos show the spe...

Cobalt Value Pack (Selection of parts and accessories) A combination of tools, accessories and spare parts to make installation Cobalt Motors easy ...

SIX plug & play pre-wired switches – red Mimic LEDs – (pre-terminated plug-in LEDs).Please use with an SPS-12 split-rail power supply.

Mimic Extension Lead Connectors – sold in packs of six, this is the most basic “joiner” for connecting Alpha Mimic extension leads.Because control ...

Working Shunt Lamps LMS / BR (4mm Scale) Red and White (6 Pack)6 x accurate 4mm scale working guards van/passenger end of train lamps, square LMS /...

A pack of 6 x daylight white ultra small pre-wired NANO LEDs. LEDs are 0.8mm x 0.7mm x 1mm. Wire is super-fine 150mm x 0.12mm. Packed with resistor...

Cobalt iP DCC Decoder Stall Motor Drive Type (1 Output/High Power)AD1HP is a Single output high power DCC accessory decoder for Cobalt type motors....

TWIN Wire Decoder Stranded 6m (32g) Yellow/Blue6 metres of twinned Yellow and Blue Stranded 32 gauge Decoder wire – When it comes to installations,...

TWIN Wire Decoder Stranded 6m (32g) White / Blue6 metres of twinned White and Blue Stranded 32 gauge Decoder wire – When it comes to installations,...

TWIN Wire Decoder Stranded 6m (32g) Orange/Grey6 metres of twinned ORANGE and GREY Stranded 32 gauge Decoder wire – When it comes to installations,...

Decoder Wire - Stranded 6m (32g) Grey. 6 metres (enough for 50+ installations) of Grey Stranded 32 gauge Decoder wire.

Decoder Wire - Stranded 6m (32g) Blue. 6 metres (enough for 50+ installations) of Blue Stranded 32 gauge Decoder wire.

Scenic Sounds Modules bring life to any layout!Sound can really bring a layout to life and these new modules make it so easy; just connect two wire...

Something special for those who find soldering complex wiring difficult: Three complete harnesses for Cobalt-S levers complete with 9-way spring co...

Longer than the standard Prodigy lead, this useful item can be used with Extension Plates, Walkarounds and the Booster unit to give you even more f...

AE Model Next-18 4 Function Decoder – Quality decoders at a sensible price. All AE decoders conform to NMRA and NEM standards. They are produced to...

The DCCconcepts DCC-LSP Surge Protector effectively buffers power turn-on surges and helps to minimise annoying fast momentum short circuits that c...

Pack of 50 ‘DCC-Tags’. There is no easier way to mount and secure the power bus (With ZERO need for cutting) than with these tags. Left and right p...

Model railway electrics are often seen as something of a dark art in the world of railway modelling, but there’s really no need to be intimidated b...

This module allows you to convert signals to DCC operation. This unit is quick and easy to connect up to existing signals on your railway and with ...

Alpha Switch Extension Wire – Supplied with heat shrink, this will give those who like to solder an economical way to extend Alpha Switch connectio...

Decoder Wire - Stranded 6m (32g) Orange. 6 metres (enough for 50+ installations) of Orange Stranded 32 gauge Decoder wire.

12v Split-Supply PCB only.Use this PCB with your own power supplies to create a split-rail power supply.

Cobalt Right-Angle Adapters w/Mounting Hardware (3 Pack) The Cobalt right-angle adapter will allow you to install your Cobalt motors horizontally, ...

Bachmann 21 Pin Decoder Blanking Plates Pk 10

Bachmann 6 Pin Decoder Socket With Wiring Harness Packet of 3