Electrical Components

4MM SR White Tail Lamps Only.  OO Scale

270-18 Analogue Multi Tester • 7 ranges of DC and 4 ranges of AC positions • Easy to read and use • Ideal pocket size for testing electrical and el...

Instant easy lighting for any coach. Easy to fit in seconds, no wiring No switch, turns on automatically as train moves No pickups, works with regu...

10 x Red Grain of Wheat Small Bulbs - 3mm diameter for 12v AC or DC operation

SIX plug & play pre-wired switches – red Mimic LEDs – (pre-terminated plug-in LEDs).Please use with an SPS-12 split-rail power supply.

Decoder Wire - Stranded 6m (32g) Blue. 6 metres (enough for 50+ installations) of Blue Stranded 32 gauge Decoder wire.

SIX plug & play pre-wired switches – dual red/green Mimic LEDs – (pre-terminated plug-in LEDs).Please use with an SPS-12 split-rail power sup...

M.R.S switches (on/off) - Green Pack of 2

Max rating @16volts (max) 2AMPS (continuous) or 2.5 amps (passing contact)

A23100 3 Pin DIN Plug and Socket Set. Standard size DIN Plugs. Overall length: 60mm. Will accept cables up to 6mm diameter.

Wire Decoder Stranded 6m (32g) Assorted PackExclusive to DCCconcepts, this pack now includes all 11 “standards defined” decoder wire colours includ...

The easy way to differentiate your toggle switches. Simply pop them over the end of your toggle switches.This pack contains 12 x Blue ToggleToppers.

The easy way to differentiate your toggle switches. Simply pop them over the end of your toggle switches.This pack contains 12 x Green ToggleToppers.

Mimic Extension Lead Connectors – sold in packs of six, this is the most basic “joiner” for connecting Alpha Mimic extension leads.Because control ...

A pack of 6 x daylight white ultra small pre-wired NANO LEDs. LEDs are 0.8mm x 0.7mm x 1mm. Wire is super-fine 150mm x 0.12mm. Packed with resistor...

TWIN Wire Decoder Stranded 6m (32g) White / Blue6 metres of twinned White and Blue Stranded 32 gauge Decoder wire – When it comes to installations,...

TWIN Wire Decoder Stranded 6m (32g) Yellow/Blue6 metres of twinned Yellow and Blue Stranded 32 gauge Decoder wire – When it comes to installations,...

Decoder Wire - Stranded 6m (32g) Grey. 6 metres (enough for 50+ installations) of Grey Stranded 32 gauge Decoder wire.

TWIN Wire Decoder Stranded 6m (32g) Orange/Grey6 metres of twinned ORANGE and GREY Stranded 32 gauge Decoder wire – When it comes to installations,...

7 METRE ROLL OF Red 16/0.2mm CABLE

7 METRE ROLL OF Black 16/0.2mm CABLE

This Track Link Wire Pack is suitable to connect one isolated circuit to another and can be used in conjunction with the TrakMat layout when only o...

4 Power Manager sub-districts. Upgraded replacement for PM42, fully encased.

10 x Yellow 5mm 12v LED

10M of Very Fine Cable BLUESuper flexible very fine cable ideal for use in Model Railway Carriages, Buildings etc.5 strand 0.10mm.Rated 0.5amp

The DCCconcepts DCC-LSP Surge Protector effectively buffers power turn-on surges and helps to minimise annoying fast momentum short circuits that c...

This electronic uncoupler uses an electro-magnet to operate the coupling allowing the operator to uncouple rakes of rolling stock from the locomoti...

EZE-Wire Point Motor Switch Box.For simple wiring & operation of 1 to 5 Model Railway point motors. For use with a suitable power source of 12-...

Pack of 5 SPDT Miniature Changeover switches. Centre Off. 3 postions: ON/OFF/ON H 9mm x W 13mm x D 7mm) Hole required: 6.35mm Rated: 5A/28v DC

10 m. Diameter and alloy adapted for use with steering magnet.

Pack of 50 ‘DCC-Tags’. There is no easier way to mount and secure the power bus (With ZERO need for cutting) than with these tags. Left and right p...

SR White Head & Tail Lamps (5), OO Gauge

Power supply quality is really important, particularly with Digital products, so we are really pleased to offer these exceptional 12v, 3 amp power ...

Pack of 5 Miniature Reed Switch. Overall length: 55mm. Body: 18.5mm x 2.6mm. Max Voltage: 220v AC @ 0.5A. Normally Open.

This pack contains 10x reed switches and 5x magnets of varying sizes for use with model railways. This product is included in our extensive Gaugem...

Decoder Wire - Stranded 6m (32g) Orange. 6 metres (enough for 50+ installations) of Orange Stranded 32 gauge Decoder wire.

12v Split-Supply PCB only.Use this PCB with your own power supplies to create a split-rail power supply.

The GM500D is a DCC friendly self latching relay. It works in conjunction with standard 3 wire point motors being operated via a DCC accessory deco...

Brand: Graham Farish Part Number: 379-428 Scale / Type: N Scale Our Code: 379-428

Brand: Gaugemaster Part Number: GM40 Scale / Type: Z / N / TT / HO / OO / O / Gauge 1 / G / Slot Cars A low cost 1.5 Amp rectifier for conv...

Model railway electrics are often seen as something of a dark art in the world of railway modelling, but there’s really no need to be intimidated b...

Three spare harnesses and connection PCB’s for Cobalt-S wiring.

This is a great item if you want a professional look to the installation of an LED in a panel on your layout. Once a hole is drilled, in the panel,...

The easy way to differentiate your toggle switches. Simply pop them over the end of your toggle switches.This pack contains 12 x Black ToggleToppers.

Alpha Mimic Extension Leads – 6pcs 150mm extension leads for Alpha Mimmic LEDs and Ground Signals.You will also need the DCD-MJ6 joiners.

Alpha Mimic Extension Leads – 300mm extension leads for Alpha Mimic LEDs and Ground Signals. (6 pieces)

This module allows you to convert signals to DCC operation. This unit is quick and easy to connect up to existing signals on your railway and with ...