Layout Control

Provides the short burst of current required to operate the PL-11 and PL-10 series of Turnout Motors. The PL-31 Connectors are ideal for attaching ...

Brand: Train Tech Part Number: SE1 Scale / Type: OO Scale Our Code: SE1 SE1 - Smart Screen Enclosure - pack of 2 3D Printed housing for y...

Brand: Peco Part Number: PL-80 Scale / Type: HO / OO Scales Our Code: PL80 These new Power Feed Joiners will help address the worries o...

Pack of 5 DPDT Miniature switches 2 positions: ON/ON H 9mm x W 13 mm x D 11.5mm Hole required: 6.35mm Rated: 5A/28v DC

These new Power Feed Joiners will help address the worries of soldering that many modellers' have: they're the safe, clean and tidy way of bringing...

Pack of 5 SPDT Sub Miniature switches. 2 postions: ON/ON (H 8.64 x W 8.13 x D 5.08mm) Hole required: 4.5mm Rated: 5A/28v DC

Dimensions: 28mm long 10mm Diameter Hole reqd: 7mm

Copper Tape (For Bus Bars) 10m x 12mm Current rating 5 amp

These new Power Feed Joiners will help address the worries of soldering that many modellers' have: they're the safe, clean and tidy way of bringing...

NANOlight (w/resistors) 6x (1-Colour) Signal Green.A pack of 6 x signal green ultra small pre-wired NANO LEDs. LEDs are 0.8mm x 0.7mm x 1mm. Wire i...

NANOlight (with resistors) 6 x (1-Colour) Amber. A pack of 6 x amber ultra small pre-wired NANO LEDs. LEDs are 0.8mm x 0.7mm x 1mm. Wire is super-f...

A pack of 6 x signal red ultra small pre-wired NANO LEDs. LEDs are 0.8mm x 0.7mm x 1mm. Wire is super-fine 150mm x 0.12mm. Packed with resistor sel...

A pack of 6 x daylight white ultra small pre-wired NANO LEDs. LEDs are 0.8mm x 0.7mm x 1mm. Wire is super-fine 150mm x 0.12mm. Packed with resistor...

3-Wire RGB Ribbon (5m)A 5 metre length of 3-wire ribbon cable for interconnection of all 3-wire switching including Cobalt Alpha (red/green/black) ...

RJ12 6pin Curly Cord For NCE Powercab and Cobalt Alpha – 2m/6ftCan also be used for NCE Procab connections.2m/6ft curly cable with RJ12 connectors ...

Extension Wire is Just Plug-compatible and has soft insulation for easy stripping. Paired wire is color-coded for proper connection with Splicer Pl...

Brand: Peco Part Number: PL-23 Scale / Type: N / HO / OO / O Scales Our Code: PL-23 Single pole change over switch. Use this switch to co...

Brand: Hornby Part Number: R8232 Scale / Type: OO Scale To adapt Hornby points for use with DCC Systems

3 Pin mains plug and cable for use with the DCC63 Switch Mode Power Supply. This mains lead is fitted with a figure 8 plug ready to plug into the t...

Pack of 5 SPDT Miniature Changeover switches. Centre Off. 3 postions: ON/OFF/ON H 9mm x W 13mm x D 7mm) Hole required: 6.35mm Rated: 5A/28v DC

Self Adhesive.5mm x 25 Metres.Ideal for wiring Dolls Houses, Model Railway Coaches etc.Can be soldered, we recommend the use of 77595 super flux ge...

Plug Together 12 Way Connector Block Set. Rated 6amp Easily cut to required number.

Pack of 5 SPST Miniature switches. 2 positons: ON/OFF (H 9 x W 13 x D 7mm) Hole required: 6.35mm Rated: 5A/28v DC

Pack of 5 SPST Sub Miniature switches. 2 positons: ON/OFF (H 8.64 x W 8.13 x D 5.08mm) Hole required: 4.5mm Rated: 5A/28v DC

Pack of 5 SPDT Miniature Changeover switches. 2 postions: ON/ON (H 9 x W 13 x D 7mm) Hole required: 6.35mm (Rated: 5A/28v DC) 

Enables locomotives without decoder sockets to have an 8-pin decoder socket fixed to them.   Socket Dimensions: 10mm x 10mm x 5mmCable Length: 90mm...

Pack of 5 Miniature Reed Switch. Overall length: 55mm. Body: 18.5mm x 2.6mm. Max Voltage: 220v AC @ 0.5A. Normally Open.

An extension cable for Dapol's servo actuated signals*. NOTE: If you are extending the operating range of a two arm bracket signal you will requir...

10 x Green Grain of Rice Tiny Bulbs - 1.8mm diameter for 12v AC or DC operation

Brand: Kato Part Number: 24-828 Scale / Type: N Scale Our Code: 24-828

The R7324 adapter enables a Hornby Power Supply Unit (PSU) to be connected directly into the Hornby power track for HM7000 fitted locomotives.   Pl...

10 x Red 5mm 12v LED

10 x Green 5mm 12v LED

Dimensions: 28mm long 10mm Diameter Hole required: 7mm

Dimensions: 28mm long 10mm Diameter Hole reqd: 7mm

Push Button Switches Dimensions: 28mm long 10mm Diameter \n Cut-out reqd: 7mm

Push Button Switches - Economy Type Dimensions: 28mm long / 10mm Diameter\n Hole reqd: 7mm

Dimensions: 28mm long 10mm Diameter Hole requiredd: 7mm

Alpha Mimic Extension Leads – 6pcs 150mm extension leads for Alpha Mimmic LEDs and Ground Signals.You will also need the DCD-MJ6 joiners.

Alpha Mimic Extension Leads – 300mm extension leads for Alpha Mimic LEDs and Ground Signals. (6 pieces)

12v Split-Supply PCB only.Use this PCB with your own power supplies to create a split-rail power supply.

Use with "Just Plug" Extension Wire Create custom length extension cables Fast and Easy Connection

This track tester works on OO, HO and N Gauge track and enables you to quickly test track for DCC or DC power as well as also helping you to locate...

These OO Gauge leads have fish plates at one end stripped and bare wire tinned on the other, wire colours are Black and Orange and measure 1m in le...

Micro harness 8-way. pack of 1.

Micro harness 4-way. Pack of 3.

Micro harness 2-way. Pack of 4.