as standard
as standard
Accessory Decoder CDU Solenoid Drive SX 4-Way with Power-Off Memory and Protective CaseADS-4sx is an easy-to-use 4-way DCC accessory decoder for so...
View full detailsIntroducing Cobalt-iP Analog – Cobalt-iP Analog is a new Cobalt product that takes the very best features of Cobalt Classic-O and Cobalt Digital-iP...
View full detailsWall Mounted Entry Lights
Wall Mounted Gooseneck Lights
Wall Mount Entry Lights (2)
No electrical knowledge or special tools needed...just plug and you're done! The Just Plug™ Lighting System is a quick and easy way to add realism ...
View full detailsSmall in size, big in brightness! Ready to plug into Light Hub. Simulates individual bulb and available in a variety of colors. 30AWG gauge wire. 2...
View full detailsNo electrical knowledge or special tools needed...just plug and you're done! The Just Plug™ Lighting System is a quick and easy way to add realism ...
View full detailsBrand: Peco Part Number: PL-23 Scale / Type: N / HO / OO / O Scales Our Code: PL-23 Single pole change over switch. Use this switch to co...
View full detailsThis point motor passing contact switch in black supplies the brief pulse of current that a point motor requires. The switch also comes supplied wi...
View full detailsGrain Of Wheat Bulbs Pack of 5Available in Red / Blue / White / Green / YellowOverall length of wire is 8 inches
4 Pin DIN Plug and Socket Set. Standard size DIN Plugs. Overall length: 60mm. Will accept cables up to 6mm diameter.
A230-62Pack containing 2 each of Red & Black 4mm Economy Sockets
Zen decoder software has always been smooth, clever and easy to use but our new BLACK decoder range takes this to a new level, with extended and im...
View full detailsA pack of three 8-pin harnesses to fit direct plug 6-pin decoders. NEM652 8-pin plug to 6-pin NEM651 socket harness.
Zen decoder software has always been smooth, clever and easy to use but our new BLACK decoder range takes this to a new level, with extended and im...
View full detailsCobalt-SS 2 Pack – Small, Reliable, Super-Smooth Above-Board Turnout Motors, ready for DC or DCC use.Cobalt-SS 2 Pack – This pack contains 2x Cobal...
View full detailsThe TTS Sound Decoder - Princess Royal Class supports both long and short decoder addresses and features adjustable acceleration and deceleration ...
View full detailsThe DCC92 is a 8 pin decoder with a fitted 45mm harness between the pins and the decoder. An ideal decoder for retrofitting into non DCC Ready loco...
View full detailsDecoder Wire - Stranded 6m (32g) Orange. 6 metres (enough for 50+ installations) of Orange Stranded 32 gauge Decoder wire.
Micro harness 4-way. Pack of 3.
Cobalt Mounting Foam Pads (12 Pack)Twelve custom cut double sided foam mounting pads and specially prepared, “selectively glued,” colour-printed ba...
View full detailsPlug and Play Universal fascia panel supporting LocoNet. Two RJ12 front panel Throttle jacks. Three RJ12 rear pass-through LocoNet jacks Suppo...
View full detailsSet of 10 Test Leads, each lead is 50cm long with plastic insulated miniature crocodile clips at each end. Max current 0.5A.Ideal for testing circu...
View full detailsThe pack contains one OO scale Buffer Stop and Light, which is ready to be situated on any section of track. No construction is required to install...
View full detailsThe 4-pin decoder, previously only available as a spare (X9659), is compatible with the 0-4-0 W4 Peckett from the 2020 range. Also suitable for Sen...
View full detailsFor use with Woodland Scenics "Static King"Input 110V / 240V ACOutpuit: 12V DC 1500mACable length: 121cm (48in)
Brand: Kato Part Number: 24-843 Scale / Type: N Scale Our Code: 24-843
Brand: Peco Part Number: SL-427 Scale / Type: OO9 Scale Our Code: SL-427 Wagon Turntable. Finely detailed plastic moulding.
PowerBase Starter Kit OO/HO ScaleFor OO/HO and larger scales. Contains approx. 2.5 Metres of PowerBase Centipede Plates, 6 magnets and 6+ housings,...
View full detailsWith the use of the Sensor Signal developed by Train Tech you can easily add automatic signalling into your layout in seconds. The signals work by ...
View full detailsOne Cobalt-S Signal Box Lever including all installation accessories.Cobalt-S Levers bring a sense of reality to the control of model railways. The...
View full detailsWooden Pole Street Lights (3)
The Tidy Wire Kit gives you easy access for expansion while keeping cables secure and tidy. Attach the Wire Tie Mounts to your layout with their ad...
View full detailsSome manufacturers support 21 pin decoders in their locomotives. Given that this narrows down the choice of decoders available for modellers to use...
View full detailsPush to Make Switches pack of 5 switches.Colour - Red
A simple yet effective method of switching turnouts. The PL-18 Studs are inserted into the control panel, often laid out as a layout diagram. A wir...
View full details18 strand cable ideal for wiringModel Railways & similar applications:Rated: 1.4A @ 1000v MaxOutside Diameter: 1.0mm
Zen NANO 8 Pin Direct 4 Function w/Stay Alive.The ZN8D Zen Nano-Direct decoder is smaller than many DCC blanking plugs… It is by far the worlds sma...
View full detailsLoco & Rolling Stock LampsAs with all things in the hobby, detail matters.In the real world, no Steam locomotive or early diesel loco ever ran ...
View full detailsAD-8fx is a high performance high feature level 8-output DCC accessory decoder with reversing DC outputs for Cobalt type motors and similar devices...
View full detailsImperium is Dapol’s own brand of decoder. They have been designed to offer a full range of functions at a reasonable price, complementing the addit...
View full detailsThe E-Z Command Control Centre is an ideal starting point for your digital layout.Features:• Easy to use system• Built-in control for analogue trai...
View full detailsWorking Loco Lamps LNER/ER (4mm Scale) Red (6 Pack)A pack of six accurate 4mm scale rounded type LNER/ER working steam era locomotive lamps with wo...
View full detailsTWIN Wire Decoder Stranded 6m (32g) Red / Black6 metres of twinned Red and Black Stranded 32 gauge Decoder wire – When it comes to installations, t...
View full detailsPower Pack is a device is designed to control your scale model railroad products and supply power to operate rolling stock, switch turnouts, or to ...
View full detailsSingle track controller designed to allow the operator to control the layout away from the control panel. This controller has a rotating dial to co...
View full details21-Pin DCC Decoder with 6 functions. THis decoder is ideal for steam and diesel locomotives with fitted lighting and other external functions. CON...
View full details