Model Railways

10 x Amber Grain of Wheat Small Bulbs - 3mm diameter for 12v AC or DC operation

10 x Blue Grain of Wheat Small Bulbs - 3mm diameter for 12v AC or DC operation

10 x Red Grain of Rice Small Bulbs - 3mm diameter for 12v AC or DC operation

10 x Green Grain of Rice Tiny Bulbs - 1.8mm diameter for 12v AC or DC operation

10 x Red 3mm 12v LED

10 x Green 3mm 12v LED

10 x Yellow 3mm 12v LED

10 x Red 5mm 12v LED

10 x Green 5mm 12v LED

10 x Yellow 5mm 12v LED

Clear (White) 3mm LED -for 4-5volt operation, but supplied with the correct resistor for 12 volt operation.

5 x Flashing Red 5mm LED

5 x Flashing Yellow 5mm LED

5 x Flashing Red 3mm LED

5 x Flashing Green 3mm LED

2 x Clear (White) 5mm LED -for 4-5volt operation, but supplied with the correct resistor for 12 volt operation.

Pack of assorted Heat Shrink 1.8mSHRINK RATIO 2:1.

Double sided self adhesive pad includedSuitable for use with motors: 260-22/23/24/30 & 31

Pack of 5 SPST Miniature switches. 2 positons: ON/OFF (H 9 x W 13 x D 7mm) Hole required: 6.35mm Rated: 5A/28v DC

Pack of 5 SPDT Miniature Changeover switches. Centre Off. 3 postions: ON/OFF/ON H 9mm x W 13mm x D 7mm) Hole required: 6.35mm Rated: 5A/28v DC

Pack of 5 SPDT Miniature Changeover switches. 2 postions: ON/ON (H 9 x W 13 x D 7mm) Hole required: 6.35mm (Rated: 5A/28v DC) 

Pack of 5 DPDT Miniature switch. Centre off. 3 positions: ON/OFF/ON (H 9 x W13 x D 11.5mm)

Pack of 5 DPDT Miniature switches 2 positions: ON/ON H 9mm x W 13 mm x D 11.5mm Hole required: 6.35mm Rated: 5A/28v DC

Momentary action - toggle springs back to centre (off) position when released.Ideal for operating solenoid motors, such as point motors used on mod...

Momentary action - toggle springs back to centre (off) position when released.Ideal for operating solenoid motors, such as point motors used on mod...

Pack of 10 Push to Break (Black only)

Dimensions: 28mm long 10mm Diameter Hole reqd: 7mm

Push Button Switches Dimensions: 28mm long 10mm Diameter \n Cut-out reqd: 7mm

Dimensions: 28mm long 10mm Diameter Hole reqd: 7mm

Dimensions: 28mm long 10mm Diameter Hole required: 7mm

Dimensions: 28mm long 10mm Diameter Hole requiredd: 7mm

Push Button Switches - Economy Type Dimensions: 28mm long / 10mm Diameter\n Hole reqd: 7mm

Pack of 5 Miniature Reed Switch. Overall length: 55mm. Body: 18.5mm x 2.6mm. Max Voltage: 220v AC @ 0.5A. Normally Open.

Pack of 5 SPST Sub Miniature switches. 2 positons: ON/OFF (H 8.64 x W 8.13 x D 5.08mm) Hole required: 4.5mm Rated: 5A/28v DC

Pack of 5 SPDT Sub Miniature switches. 2 postions: ON/ON (H 8.64 x W 8.13 x D 5.08mm) Hole required: 4.5mm Rated: 5A/28v DC

Pack of 5 DPDT Sub Miniature switches.2 positions: ON/ON(H 8.64 x W 8.13 x D 9.14mm) Hole required: 4.5mm Rated: 5A/28v DC

Momentary action - toggle springs back to centre (off) position when released.Ideal for operating solenoid motors, such as point motors used on mod...

Pack of 5 DPDT Sub Miniature switches. Centre off. 3 positions: ON/OFF/ON (H 8.64 x W 8.13 x D 9.14mm) Hole required: 4.5mm Rated: 5A/28v DC

Pack of 5 SPDT Sub Miniature switches. Centre off. 3 positions: ON/OFF/ON (H 8.64 x W 8.13 x D 5.08mm) Hole required: 4.5mm Rated: 5A/28v DC

EZE-Wire Point Motor Switch Box.For simple wiring & operation of 1 to 5 Model Railway point motors. For use with a suitable power source of 12-...

EZE-Wire Point Motor Harness suitable for PECO point Motors. 1 metre cables which can easily be lengthened using extension leads. Full instructions...

10 m. Diameter and alloy adapted for use with steering magnet.

Parking module for the permanent stopping of vehicles in parking lots. The vehicle is reactivated by the magnetic field of the electric coil. Conne...

Set of 1:87 Scale Modern Freight Loads produced as a plastic kit. This model features lots of expertly applied details as based on the prototype. T...

2 bridge parts with track beds, each 45 ° (can be shortened to 30 °), mean radius 193 mm. 6 pillars of 38 mm each. Clearance height with pillars 57...

Electric turnout mechanism for Left hand turnouts. Suitable for N gauge turnouts without ballast bed. Double spool operation with end-off switching...