as standard
as standard
Track on a roll 25 feet x 2 inches Sticks to any flat surface for instant track building Simply pull up to reposition No residue tears to any lengt...
View full detailsA handy addition to any OO scale modeller’s tool kit, this Loco Crankpin Box Spanner is an essential tool for maintaining your cherished Bachmann B...
View full detailsTwo Rail Built Buffer Stops Often built using lengths of scrap rail, rail-built buffer stops are an important addition to any siding or terminus ...
View full detailsThis pack will provide you with every spare part that you could possibly need to maintain your track cleaner in peak performance. This kit contain...
View full detailsThis set offers a selection of buffing and polishing pads to replace used ones on your Dapol DAB800 OO/HO Gauge Motorised Track Cleaning Wagon.
A pack of five extension pins suitable for Peco, Seep, Hornby and Hattons point motors. Each pack includes 5 extension pins and 5 joining collars.
100 hardened and gold plated pins for fixing of rod stools, track or many other things around the layout.Small and subtle but very strong, the gold...
View full details500 hardened and gold plated pins for fixing of rod stools, track or many other things around the layout.Small and subtle but very strong, the gold...
View full detailsThe Rod only pack contains 40 250mm lengths of rodding, rod pockets and mounting rivets plus some turnout motor linkages.An ideal add-on for the fu...
View full detailsWith the following contents, this set will get you underway with working rodding without the need for added parts.20x lengths of 250mm rodding50x ...
View full detailsFibreglass Brush Refills Fine (5 Pack)
Exclusively made for DCCconcepts. These super sharp cutters have a flat back for a perfect flush cut and have been hardened to the limits to stay s...
View full detailsA box of 100 feet (31metres) of high quality, OO / HO Scale trackbed (3mm thick / scale 9~10″ appx high). Made from very long life EVA, closed cell...
View full detailsTrackbed OO/HO Scale 5mm (31m/100ft.) A box of 100 feet (31metres) of high quality, OO/HO Scale trackbed (5mm thick / scale 15″ appx high). Made ...
View full detailsTrackbed Sheets 3mm (600 x 300mm) (10 Pack)A box of 10 sheets of high quality, 3mm thick track bed for yard areas etc, 300mm x 600mm. Made from ver...
View full detailsPowerBase Starter Kit OO/HO ScaleFor OO/HO and larger scales. Contains approx. 2.5 Metres of PowerBase Centipede Plates, 6 magnets and 6+ housings,...
View full detailsPre-Etched Sleepers 1.0mm (4mm scale) Straight Track.4mm scale UK prototype sleepering, pre-etched. This fret contains 80 sleepers for plain pointw...
View full detailsPre-Etched Sleepers 1.6mm (4mm scale) Straight Track.4mm scale UK prototype sleepering, pre-etched. This fret contains 80 sleepers for plain pointw...
View full details300mm high quality track feed wires pre-soldered to Legacy Rail Joiners. Compatible with Code 100 track from Legacy and equivalent track from all m...
View full details300mm high quality track feed wires pre-soldered to Legacy Rail Joiners. Compatible with Code 75 track from Legacy and equivalent track from all ma...
View full detailsBullhead Fishplate 4mm scale, 25 pcs pack: These high quality 4mm scale rail joiners have been made to look as realistic as possible and include bo...
View full detailsSpecially developed kit of 3 swabs with handles and 1 spare sponge for easy application of Track Magic. (Product Code AC18) Apply Track Magic with ...
View full detailsDeluxe Materials Track Magic is a special liquid cleaning fluid for model rail & car metal tracks, electric contacts and wheels. Track Magic wo...
View full detailsThese OO Gauge leads have fish plates at one end stripped and bare wire tinned on the other, wire colours are Black and Orange and measure 1m in le...
View full detailsCode 100 Nickel silver Fishplates OO gauge compatible with Peco, Hornby, Atlas and Bachmann track. QUANTITY PER PACK 24
Perfect for those with smaller layouts, smaller hands or smaller budgets. MEASUREMENTS: LENGTH 50mm WIDTH 25mm DEPTH 20mm
An old favourite, the secret to clean track is to use a variety of cleaning methods on a regular basis. High frequency track cleaners, track cleani...
View full detailsBrand: Gaugemaster Part Number: GM37 Scale / Type: HO / OO Scales OO/HO. These axle hung cleaning pads kiss the rails as they traverse your...
View full detailsThe pack contains one OO Scale buffer stop which just simply clips on to the track. No construction or gluing is required to install this item on t...
View full detailsLong track pins for securing track to baseboards. MEASUREMENTS PACK 50g PIN LENGTH 15mm
The 12v DC controlled output from the controller is passed through the unit. Connection between unit, power source, controller and track is achieve...
View full detailsAdjustable height setting allows you to alter the depth of ballast. With the shut off valve you can halt the flow of ballast whilst you lift the Ba...
View full detailsThis versatile track tester device is compatible with a range of model train track gauges, including OO gauge, HO gauge, TT gauge and N gauge. It ...
View full detailsBrand: Hornby Part Number: R207 Scale / Type: OO Scale These pins are designed to fix track to baseboard through holes ready drilled in eac...
View full detailsThis Track Link Wire Pack is suitable to connect one isolated circuit to another and can be used in conjunction with the TrakMat layout when only o...
View full detailsItem Length - Without Packaging (cm) 5.3 Item Scale 1:76 Scale 00 Gauge Finish Painted Colour Black Gauge OO Operator Hornby
If you are keen to expand your railway scenery then look no further! This pack of 12 non-conductive fishplates are the ideal solution for creating ...
View full detailsIPA Track Cleaning Fluid.Add to a lint free cloth and watch as the dirt lifts from the track.50ml bottle.
Brand: Peco Part Number: IL-120 Scale / Type: OO Scale Our Code: PEIL-120 Conductor rail chairs, these accurately detailed mouldings ar...
View full detailsAn abrasive rubber block for burnishing the rail surface. Ensures good electrical contact.
Peco are very happy to be able to offer a complementary motor for their popular turntable kits. Although these were never designed to be motorised ...
View full detailsBrand: Peco Part Number: PL-71 Our Code: PL-71 This useful new kit contains all the necessary components required for the maintenance of mo...
View full detailsThese new Power Feed Joiners will help address the worries of soldering that many modellers' have: they're the safe, clean and tidy way of bringing...
View full detailsDesigned to be used with our OO/HO Code 100 track systems (Ref nos. SL-100 and 102); also with O Gauge Bullhead (SL-700BH) and O -16.5/0n30 (SL-500...
View full detailsDesigned to be used with our 00/H0 Code 100 track systems (Ref nos. SL-100 and 102); also with 0 Gauge Bullhead (SL-700BH) and 0-16.5/0n30 (SL-500)...
View full detailsBrand: Peco Part Number: SL-110 Scale / Type: OO Scale Our Code: SL-110 Metal Rail Joiners. For connecting rail ends together. Provides b...
View full detailsPeco Streamline Code 75 track meets the standards of enthusiasts who prefer to run trains on scale height rail. This rail height is used for our 00...
View full details