as standard
as standard
Advanced Construction Signals. Aimed at modellers with more experience, these kits enable you to custom make specific configurations of signals to ...
View full detailsBrand: Peco Part Number: LK-55 Scale / Type: OO Scale Our Code: LK-55 This easily assembled model is based on a Ransome and Rapier well...
View full detailsWhite. Includes 2 x 680mm straight fencing, 2 x 103mm ramp fencing, 1 large & 1 small gate, 2 ramp gates and ticket gate
Pack contains simple kits to make 6 Post Boxes; 2 Pillar, 2 Post Mounted, 2 Wall Mounted. Simple painting is required for realism. Recommended to ...
View full detailsBrand: Ratio Part Number: 553 Scale / Type: OO Scale Our Code: RO553 Ratio's new Signal Box Interior kit includes the lever frame, leve...
View full details6 traditional yard lamps, representing those mounted on wooden posts. With separate ladders. Non-working, but perfect for adding detail in the good...
View full detailsBrand: Wills Part Number: SS90 Scale / Type: HO / OO Scales At last! Now modellers can recreate the familiar sight of point rodding alongsi...
View full detailsSeen at many stations as well as at schools and factories. Supplied with pre-coloured parts although painting and/or weathering can add realism; gl...
View full detailsBrand: Wills Part Number: SS20 Scale / Type: OO Scale including glazing. Area of greenhouse 56 x 41mm, coldframes 26 x 25mm each.
Brand: Dapol Part Number: C4 Scale / Type: OO Scale Our Code: C004 The picture shows a finished model complete with paint, please note th...
View full detailsBrand: Dapol Part Number: C003 Scale / Type: OO Scale Our Code: C003 The picture shows a finished model complete with paint, please not...
View full detailsA 45mm long replication of a wooden staircase, such as would be used to provide access to a signal box or other raised office/factory areas. Suppli...
View full detailsModern type crossing barriers complete with dummy light standards. Can be used with the Peco Setrack Level Crossings ST-261/263/266/267 and 268 Te...
View full detailsBrand: Dapol Part Number: C030 Scale / Type: OO Scale Our Code: DAC030 The picture shows a finished model complete with paint, please note...
View full detailsAn essential part of every small steam loco depot, add some Peco Scene Real Coal Refs PS-330/1/2 for full effect. Supplied with pre-coloured parts ...
View full detailsUsed where railway crosses landowners road or track. Normally left closed to road traffic. Includes stiles and working hinges.
Compatible with the scratchbuilding accessories. 17 pieces. Also contains various small parts like aerials chimneys etc. for the spares box.
Brand: Wills Part Number: SS28 Scale / Type: OO Scale Underpass for farm or light traffic. Stone abutments and decking included. Length 70m...
View full detailsBrand: Wills Part Number: SS80 Scale / Type: OO Scale With 3 stone / brick arches, 2 pillars and deck. May be used as single or double trac...
View full detailsStations often had these Water Cranes at the end of the platforms so the locomotives could be refilled without detaching them from the train. Also ...
View full detailsA spartan passenger station seen in rural areas. Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is requ...
View full detailsKeep on the right side of health and safety regulations - use these double rail stanchions in locations wherever the general public are allowed. Pa...
View full detailsThis is a pre-coloured OO scale plastic kit of a portable site office, comprising of two stackable cabins with a walkway. Appropriate decals are in...
View full detailsBrand: Dapol Part Number: C005 Scale / Type: OO Scale Our Code: DAC005 The picture shows a finished model complete with paint, please note...
View full detailsThe picture shows a finished model complete with paint, please note that this is an unpainted kit and will require assembly and painting.
Supplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. This pack contains 4...
View full detailsThe picture shows a finished model complete with paint, please note that this is an unpainted kit and will require assembly and painting.
Stations often had these Water Cranes at the end of the platforms so the locomotives could be refilled without detaching them from the train. Also ...
View full detailsThis corrugated iron building was used by GWR to provide shelter for passengers and also as a storage hut. Area 62mm x 39mm
A more modern trackside detail, concrete trunking (SS87) would carry the cabling along the lineside between boxes. Supplied with pre-coloured parts...
View full detailsKit includes: • 2 x 120mm ramps (1 L/H, 1 R/H) • 2 large gates and 2 small gates Recommended to be used with: Ratio 432 Concrete Pale Fencing (Str...
View full detailsFordhampton is a bustling market town on a busy mainline running through the rolling South Downs. With both local and express services steaming thr...
View full detailsPack contains 2 Hoardings plus a selection of signs All 1:76 Scale Model Railways and Modelling projects
Gates that open and close to form a barrier against road or rail traffic. Pair of single gates with cobbled stone and planked track crossing. Gates...
View full detailsOnce a common sight outside railway stations. Area 93mm x 47mm.
The picture shows a finished model complete with paint, please note that this is an unpainted kit and will require assembly and painting.
This kit comprises mostly of plastic injection moulded parts, plus a laser cut wooden sprue containing the lawnmower and roller. The kit contains: ...
View full detailsA common feature of country stations large and small, whilst market town cattle docks could be very large indeed. Our model is of the one at Yeovil...
View full detailsSupplied with pre-coloured parts although painting and/or weathering can add realism; glue is required to complete this model. This pack contains: ...
View full detailsMay also be used as a plain round tower. Includes stove, water crane, brass etched chain, ladder, hand rails, cistern arm and water gauge.
A more modern trackside detail, concrete trunking (SS87) would carry the cabling along the lineside between boxes. Supplied with pre-coloured parts...
View full detailsThe Fordhampton Car Showroom kit is an ideal way to show off some your miniature OO cars. The size of the built-up model can hold 4 cars and with a...
View full detailsMajor Peter Norman Nissen, of the 29th Company Royal Engineers, developed the idea of a semi-circular corrugated iron hut, with a concrete base, in...
View full detailsThe picture shows a finished model complete with paint, please note that this is an unpainted kit and will require assembly and painting.
The picture shows a finished model complete with paint, please note that this is an unpainted kit and will require assembly and painting.
A model of a fixed height derrick type jib crane, usually hand worked. Supplied with pre-coloured parts although painting and/or weathering can add...
View full details